User Manual
SLG200
Version: 1.0
LED Azul (Status Bluetooth)
LED VERMELHO (Status Wi-Fi)
Interruptor/Botão de reset
Micro-USB
Adicionando o Smart Gateway
Etapa 1. Baixe o App
Digitalize o código QR para baixar o aplicativo.
Abra o aplicativo, registre-se e faça login na conta.
Etapa 2. Adicione o Gateway
Nota:
O modo de emparelhamento padrão é o Modo EZ. Se a luz
vermelha piscar lentamente, mantenha o botão de Reset
pressionado por 5 segundos para mudá-lo para piscar rapidamente.
Conecte o Gateway à tomada usando o adaptador de energia
fornecido. Aguarde alguns segundos até que a luz vermelha
pisque rapidamente.
Abra o App. Toque no botão "+" no canto superior direito, e
selecione a categoria "Smart Lock/Wireless Gateway(BLE)".
Siga as instruções na tela para conectar o Gateway à rede Wi-Fi de
2.4 GHz e concluir a conguração.
Descrição do Produto
P
ortuguês
1.
2.
1.
2.
3.
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmf ul interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Conne ct the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT!
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
