background image

User’s Manual of                       Gun-type Remote Controller

T3GMN-2400 aeromodelling remote controller (RC) is 

a Gun-type Remote Controller specially designed for 

small vehicle models. It can be used as remote 

controller of electric vehicle models. The RC has two 

rate channels, i.e.: ST (rudder) and TH (throttle) plus 

a switch channel (CH3), the auxiliary channel. 

Besides, the RC has an additional throttle rate switch.

T3GMN-2400 remote controller can be used to 

multiple device concurrently without interference with 

each other.

Specifications of transmitter:

Working power supply: 4 ni-mh rechargeable batteries 

or alkaline cells

Working current: <35 mA

Transmitting frequency: 240

2-2480

MHz (FHSS)

Specifications of receiver:

Working power supply: 4.8 V ~ 6 V

Receiving frequency: 240

2-2480

 MHz

Transmitter 

Antenna: hold up the antenna before using 

antenna to operate the machine.

ST (rudder) Neutral: without turning ST 

(rudder) wheel, adjust ST (rudder) Neutral 

button to make the model keep running at 

linear direction.

Switch of channel .

Throttle rate switch: while in normal using 

mode, this switch can be pushed to 5/5 

position. If you wish the model to accelerate 

more slowly, you can push the switch to 3/7 

position.

ST (rudder) wheel: it is used to control 

steering of the model.
TH (throttle) trigger: push or pull the throttle 

trigger to control forward, reverse and brake 

actions of the model.

ST (rudder) steering switch: while you turn ST 

(rudder) wheel along the same direction, push 

this switch to different position, the model will 

turn to corresponding direction accordingly.

Battery cartridge: push the cover of battery 

cartridge, then you can take out the battery 

and replace it.

ST (rudder) rudder angle +/- knob: while you 

turn ST (rudder) wheel along the same 

direction, turn this knob to different positions, 
the model will turn by different angles 

accordingly.

TH (throttle) reversal switch: push TH 

(throttle) trigger backward, when TH (throttle) 

forward/ reversal switch is pushed to different 

positions, the model will run forward or 

backward accordingly.

Power ON/OFF: it is used to power ON/OFF 

transmitter.

TH (throttle) neutral: adjust TH (throttle) knob 

without pulling TH (throttle) trigger to make 

the model stand still. (TH (throttle) neutral 

knob is to be pushed to middle position before 

powering on transmitter).

Power indicator: LED indicator will illuminate 

when the transmitter is powered on.

Receiver

Code matching between transmitter and receiver:

Power on transmitter and receiver, press and hold 

Match Code switch on receiver till the indicator on 

receiver stops blinking and keeps ON, it means that 

the code matching between transmitter and receiver is 

successful.

Please note that no other similar transmitters are 

powered on within the signal receiving scope of the 

receiver matching codes while in process of code 

matching, otherwise the code matching will fail.

The code matching between transmitter and receiver 

has been done in the factory before delivery, and both 

throttle and rudder have been pushed in middle 

position. If you find the model goes forward or 

backward itself before throttle trigger is operated, 

please 

adjust 

the 

throttle 

neutral 

knob                         

a

ppropriately to stop the model. If model vehicle 

can’t run at linear direction without turning rudder, 

please 

adjust 

the 

rudder 

neutral 

knob       

a

ppropriately to make the model run at linear 

direction.

Precautions: if the device doesn’t respond to your 

operations, it indicates the transmitter’s battery is to 

run out, please replace the battery, then the device 

will work well again. The voltage of working power 

supply of receiver shall be at least 4V.

MADE IN CHINA

SHENZHEN XINGYAOHUA INDUSTRIAL CO.,LTD

Website: www.xingyaohua.com

Tel:  +86 (755) 25469375    +86 (755) 84008148

Fax:  +86 (755) 84673903

E-Mail: [email protected]

[email protected]

Reviews: