MESH LED POWER SUPPLY ZSL-25-12, ZSL-35-12, ZSL-60-12, ZSL-100-12, ZSL-150-12
MANUAL INSTRUCTION
ZAMEL
Sp. z o.o.
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04
www.zamel.com
, e-mail: [email protected]
ZSL-25_35_60_100_150_inst_GB | 29.04.21
FEATURES
DESCRIPTION
● For use in household LED installations.
● 12 V DC output voltage of high stability.
● Wide range of output power.
● Overvoltage and short-circuit protec-
tions.
● No-load operation resistance.
● Free mounting indoor only.
● Output voltage adjustment by means
of a potentiometer within a minimum
range of 10% nominal voltage.
ZSL series switched-mode power sup-
plies are designed for a direct use in
home LED lighting installations. Their
modular construction allows for an easy
and comfortable mounting indoor to hor-
izontal and vertical surfaces. The 12 V
DC output voltage power supplies are
available in a wide range of output power
(25÷150 W). The built-in protections guar-
antee a continuous and undisturbed oper-
ation of all connected LED elements. The
power supplies are equipped with output
voltage adjustment within the minimum
range of ±10% by means of a potentiom-
eter. Metal casing ensures proper power
supply cooling and prolongs its life.
TECHNICAL DATA
ZSL-25-12 ZSL-35-12 ZSL-60-12 ZSL-100-12 ZSL-150-12
Input parameters
Input voltage range:
110÷260 V AC
Input frequency range:
50 / 60 Hz
Input current:
0,3 A
0,38 A
0,65 A
0,85 A
1,05 A
Power supply cons-
umption during no load:
~0,5 W
~0,6 W
~1,5 W
~0,9 W
~3,9 W
Efficiency:
85 %
75 %
80 %
83 %
83 %
Power factor:
0,5
Output parameters
Nominal output voltage:
12 V DC
Nominal output current:
2,5 A
3 A
5 A
8,5 A
12,5 A
Output current range:
0÷2,5 A
0÷3 A
0÷5 A
0÷8,5 A
0÷12,5 A
Nominal output power:
25 W
35 W
60 W
100 W
150 W
Ripples and noises
(max):
200 mVpp
U adjustment range:
10,5÷13,5 V
8,5÷13 V
11,3÷13,2 V 11,5÷12,8 V 10,8÷15 V
Voltage tolerance:
1 %
Output voltage time
increase (max):
~15 ms
Output backup time
(max):
~80 ms
Other parameters
Overload protection:
Yes – returnable (app. 180÷200% Pn)
Output short-circuit
protection:
Yes – returnable
Thermal protection:
No
Resistance to idle state:
Yes
Operating temperature:
-20÷60°C
Protection class:
I
Overvoltage category:
II
Casing protection
degree:
IP20
Mounting:
free
Operating position:
Free (horizontal or vertical plane)
Dimensions (mm):
87x59x32,5 87x59x32,5 110x78x36,5 162x99x42 200x98x42,5
Weight:
100 g
115 g
195 g
340 g
385 g
Reference standard:
PN-EN 55015, PN-EN 61547, PN-EN 6100-3-2,
PN-EN 6100-3-3, PN-EN 61347-1
Connect this product to a
single-phase power system ac-
cording to applicable electrical
and safety standards and regu-
lations. See this Manual for the
wiring instructions. Installation,
wiring and adjustment/setting shall only be
done by qualified electricians who have read
and understood this User Manual and the
functions of the product. Do not open or oth-
erwise disassemble the product housing; oth-
erwise the product warranty will be void and
an electrocution hazard may occur. Prior to
installing and wiring this product, make sure
that the wiring to be connected is not live. The
conditions and methods of transport, storage
and operation of this product may affect its
performance. Do not install the product if any
of its components are missing, the product is
damaged or deformed in any way. If any mal-
functions are found, consult the manufacturer.
CAUTION
Do not dispose of this device with other
waste! In order to avoid harmful effects on
the environment and human health, the
used device should be stored in designated
areas. For this purpose, you can dispose
of household waste free of charge and in
any quantity to a collection point set up,
as well as to the shop when you buy new
equipment.
