RX-E600/
NX-E400
SERVICE MANUAL
■
CONTENTS
TO SERVICE PERSONNEL . . . . . . . . . . . . . . . . . . . . 2
FRONT PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
REAR PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3~4
REMOTE CONTROL PANELS . . . . . . . . . . . . . . . . . . 4
SPECIFICATIONS /
参考仕様
. . . . . . . . . . . . . . . . . . 4~5
INTERNAL VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
DISASSEMBLY PROCEDURES /
分解手順
. . . . . . . 6~7
TEST MODE /
テストモード
. . . . . . . . . . . . . . . . . . . 8~9
AMP ADJUSTMENTS /
アンプ調整
. . . . . . . . . . . . . . 10
DISPLAY DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
IC DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12~14
BLOCK DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PRINTED CIRCUIT BOARD . . . . . . . . . . . . . . . . 16~19
PIN CONNECTION DIAGRAM . . . . . . . . . . . . . . . . . 20
SCHEMATIC DIAGRAM . . . . . . . . . . . . . . . . . . . 21~22
PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23~33
REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . 34
SYSTEM CONTROL . . . . . . . . . . . . . . . . . . . . . . 34~49
NX-E400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
PARTS LIST FOR CARBON RESISTORS . . . . . . . . 51
SERVICE MANUAL
P.O.Box 1, Hamamatsu, Japan
MICRO COMPONENT SYSTEM
RDX-E600
The RDX-E600 is composed of the RX-E600, NX-E400 and the DVD-E600.
This service manual is for the RX-E600 and the NX-E400.
For the DVD-E600 service manual, please refer to the following publication number:
DVD-E600 100924
RX-E600/NX-E400
1 0 0 9 2 3
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are
already known and understood by the users, and have therefore not been restated.
WARNING:
Failure to follow appropriate service and safety procedures when servicing this product may result in per-
sonal injury, destruction of expensive components, and failure of the product to perform as specified. For
these reasons, we advise all YAMAHA product owners that any service required should be performed by
an authorized YAMAHA Retailer or the appointed service representative.
IMPORTANT:
The presentation or sale of this manual to any individual or firm does not constitute authorization, certifica-
tion or recognition of any applicable technical capabilities, or establish a principle-agent relationship of
any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering,
and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore,
inevitable and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to
exist, please contact the distributor's Service Division.
WARNING:
Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this
buss).
IMPORTANT:
Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to
the unit.
RDX-E600はRX-E600、NX-E400及びDVD-E600で構成されています。
このサービスマニュアルはRX-E600及びNX-E400用です。
DVD-E600のサービスマニュアルは下記を参照してください。
DVD-E600 100924
'04.09
Содержание Piano Craft RX-E600
Страница 52: ...RX E600 NX E400 ...
