are the hinges are on the right.
Viewed from the outside, your door is right handed it the hinges
9. Strike plate
1) Check the Handing of Your Door
and test before fitting. - see the Code Change instructions
NOTE: FACTORY HANDING - ALL LOCKSET
ARE SET TO SUIT RIGHT HAND DOORS
If you need to change the code you should change it now
4 latch & strike screws
5. All fixings - 4 code pad fixing screws,
Installation Instructions
and spindle hub move freely.
* Digital Deadlatch Assembly:Check that spring latch
The handle should turn and
return freely under
the factory set code C13579,
handle in
both directions.
* Digital Exterior and Interior Code Pad Assembly:Enter
Before commencing installation check that all parts
SPECIAL NOTES:
are working correctly.
3
8. Spindle x 3
7. Latch Assembly support post
6. 60 mm Latch assembly
4
1. Digital Exterior Code pad assembly
2. Digital Interior handle assembly
3. Hex Screw Post 25mm x 2
4. Neoprene seals x 2
2
5
4
10
6
9
8
11
7
1
OUTSIDE
Left Hand
(
LH
)
OUTSIDE
Right Hand
Right Hand
(
RH
)
Left Hand
(
LH
)
(
RH
)
10. Strike box
11. Allen key
12. Instructions and template
5
it’s own return spring.
Digital Lock Set-Changing the Code Number
* Hold the handle in this position and slide snib as shown to retain handle and set Holdback function.
* To activate Holdback function. Pull inside handle down to 6 o'clock position to completely withdraw the latch bolt.
1) The digital lock is supplied with factory set codes:C13579
2) Depress the code select button and slide the selector
from “NON CODE” to "CODE" position and the active
number is selected as shown by the RED indicator.
3) Any numbers not required to be part of the active
code should have the code selectors parked in the
“NON CODE” position.
4) The "CLEAR" button MUST always be used as the
first digit of a code.
5) For best security the code number selected should
contain 4 or 5 digits
6) Check that the new code works before installation.
ANY SEQUENCE, I.E. C13579 MAY BE
NOTE: THE CODE MAY BE ENTERED IN
ENTERED
AS C19735 OR ANY OTHER
SEQUENCE OF THOSE NUMBERS.
hand. Night latch function is working now.
NORMAL FUNCTION
NORMAL FUNCTION
ROTATION
HANDLE
ROTATION
HANDLE
SNIB
SNIB
Digital Lock Set - Holdback Function
code
select
buttons
Digital Lock Set
SL7100 Series
Q
25
07
9
03
12
-2
Digital Lock Set
SL7100 Series
Components
