background image

Escutcheon Assembly
Lever is handed, RHR (shown) 
or LHR.
Note: Lever return spring is universal
for easy field handing.  
See page 5 to change handing.

Rim Cylinder

Wave Washer

(when required)

(2) #14 Finishing Washers

Trim Spindle
Assembly

(2) 1/4-20 Pan Head
Machine Screws

Packed with device.

(2) 1/4-20 Oval Head

Cylinder Housing
Assembly

(*** For Double Cylinder
Device see below detail)

Clutch Lever

(2) Cylinder
Mounting Screws

Cylinder Housing
Cam

Cylinder Collar

(when required)

2 STUDS AWAY

FROM LOCK EDGE

2 STUDS TOWARDS

LOCK EDGE

*** - Double Cylinder Housing Assembly

Connector Bar

(2) Cylinder
Mounting Screws

   Supplied with Exit Device

626F Exit Device Trim

Installation Instructions

For use with all Yale® 7000, 2100,
1800 and 1500 Series Exit Devices
(Wood and Metal Doors)

Attention Installer

Any retrofit or other field modification to a fire rated opening can potentially 
impact the fire rating of the opening, and Yale Locks & Hardware makes no 
representations or warranties concerning what such impact may be in any 
specific situation.  When retrofitting any portion of an existing fire rated 
opening, or specifying and installing a new fire-rated opening, please consult 
with a code specialist or local code official (Authority Having Jurisdiction) to 
ensure compliance with all applicable codes and ratings.

An ASSA ABLOY Group brand

80-8470-0626-000 (01-13)

Summary of Contents for 626F







Reviews: