![background image](http://html.mh-extra.com/html/xtm/wm102-15b/wm102-15b_owners-manual_890442001.webp)
150PSI 160LPM
AIR COMPRESSOR
OWNERS MANUAL
THERMAL CUT-OFF AND CIRCUIT BREAKER PROTECTION
This XTM Air Compressor is equipped with an automatic thermal cut-off protection. If the unit reaches to unsafe operating
temperature, a protection circuit will activate cutting off all power of the unit to prevent damage. Immediately disconnect the
unit from the power source and allow it to cool if the protection circuit activates. The unit should take approximately 15
minutes to cool depending on ambient conditions. The unit protection circuit will automatically reset when the temperature
returns to a safe operating level. Always allow your air compressor to cool before reuse. Check the circuit breaker if the air
compressor stops during operation, reset if necessary.
MAINTENANCE
+ All moving parts within the air compressor have been permanently Iubricated during manufacture. It is
NOT necessary to lubricate this air compressor.
+ Before and after each use, carefully inspect the compressor unit and hoses for signs of damage.
+ Check the air filter regularly, at least every six months. Simply remove the cover and clean the air filter.
To clean the filter gently wash in mild soapy water and rinse well. Replace if worn.
SPECIFICATIONS
:
Voltage: 12 Volt DC
Maximum Pressure: 150 PSI
Maximum Air Flow: 160 Litres Per Minute
Inline Fuse: 60A
Maximum Voltage: 13.8 Volt
Maximum Amp Draw: 45 Amp
Duty Cycle: 45 Minutes at 40 PSI
Maximum Operating Temperature: 60
℃
Minimum Operating Temperature: -40
℃
Electrical Current Protection: Circuit Breaker with Reset Button
Thermal Cut-off Protection: Automatic Thermal Cut-off at I05
℃
Motor Output Power: 0.7HP Permanent Magnetic Motor
Cylinder Diameter: 60mm
Power Cord: 3 Metres Heavy Duty Wiring With Durable Battery Clamps
Rubber Air Hose: 8 Metres with In-line Pressure Gauge,
Pressure Release Button and Quick Connect Fitting
Valve Connectors: 1 X Screw-on Brass Inflator and 1 X Thumb Lock Adaptor
Pressure Gauge: 0-150 PSI / 0-1, 034 kPa Multi Readings with Plastic Protective Cover
Solid Base Plate: Metal Sand Tray With Rubber Anti - Vibration Feet - Can be Permanently Mounted To a Vehicle
Air Filter: Built-ln Cleanable Sponge Filter
Accessories: 3 X Nozzle Adaptors for Camping and Sporting Equipment
Storage: Handy Carry Bag
PLU: 580442 CODE: WM102-15B
Manufactured & packaged for
SRGS PTY LTD
ABN 23 113 230 050
6 Coulthards Avenue
Strathpine QLD 4500, Australia
MADE IN CHINA
Recyclable Paper
60A INLINE FUSE