08905095A
-
1
-
INSTALLATION INSTRUCTIONS
CPLTCX
Optical to Coaxial Digital Audio Coupler
DESCRIPTION
Xantech’s digital audio signal converter is an easy to install, clean approach to converting S/PDIF
digital audio signals from optical to coaxial format. Combine with the Xantech Coaxial to Optical
Digital Audio Coupler (CPLCT)* to provide a long distance alternative using lower cost coaxial cable
instead of optical cable.
You will need an EIAJ optical cable (Toslink)* and a coaxial cable* with RCA style ends. The length
should be based on your application.
*
sold separately
SPECIFICATIONS
Power supply, 6VDC, 200mA (included)
Size: 2-1/4” (W) x 3-1/4” (L) x 7/8” (H)
INSTALLATION
[1] Connect one end of the optical cable (Toslink) to the output port on the source component (DVD,
CD player, etc.). Connect the opposite end to the CPLTCX device.
[2] Connect one end of the coaxial cable to the input port (Digital receiver, digital audio distribution
device). Connect the opposite end to the CPLTCX device.
[3] Connect the power supply to the CPLTCX. A red pilot indicates the CPLTCX is active for use.
