WUNDER VT30, User Manual

Page: 1 / 5

WUNDER SA.BI.SRL USER MANUAL
VT30/60- VT1- VT2 REV.08 04/12/2016 1
www.wunder.it
ELECTRONIC SCALE MOD. VT30/60- VT1- VT2
User Manual
Read this manual carefully before using the instrument
VT30 / 60 VT1 VT2

Verify that the input voltage printed on the AC Adapter and the plug type matches the local AC power supply.

Make sure that the power cord does not pose a potential obstacle or tripping hazard.

Disconnect the scale from the power supply when cleaning the scale.

Do not operate the scale in hazardous or unstable environments.

Do not immerse the scale in water or other liquids.

Do not drop loads on the platform.

Use only approved accessories and peripherals,as available.

Operate the scale only under ambient conditions specified in these instructions.

Service should be performed by authorized personnel only.

It must not be bump against other items or overloaded with excessively heavy weights (The load must not exceed the
maximum capacity of the balance).

Give a warm-up for 30mins before using the scale.