Home
/
Winegard
/
TRAV'LER RP-SK01 Series
/
Lnb Replacement Instructions

Winegard TRAV'LER RP-SK01 Series, Lnb Replacement Instructions

The Winegard TRAV'LER RP-SK01 Series is a high-quality Lnb replacement kit. Ensure you have the proper instructions to successfully install and replace the Lnb with our comprehensive manual. Download it for free from manualshive.com to guarantee a smooth and hassle-free setup of your Winegard TRAV'LER RP-SK01 Series satellite system.

Share

1
2
3
4

Page: 1 / 4

background image

Automatic Multi-Satellite TV Antenna

LNB Replacement Instructions

Models RP-SK01, RP-SK05, RP-SK09,

RP-SK73, RPSK01H

For help, email [email protected]
or call 1-800-788-4417
www.winegard.com/mobile

2452261

Rev2 9/18

NOTE:

RPSK01H LNB Replacement is only

compatible with SK-1000 built after 1/1/2018.

1
2
3
...
»

Summary of Contents for TRAV'LER RP-SK01 Series

Page 1: ...acement Instructions Models RP SK01 RP SK05 RP SK09 RP SK73 RPSK01H For help email help winegard com or call 1 800 788 4417 www winegard com mobile 2452261 Rev2 9 18 NOTE RPSK01H LNB Replacement is only compatible with SK 1000 built after 1 1 2018 ...

Page 2: ...pter Disconnect the three cables from the LNB using a 7 16 wrench 3 RP SK01 Connect the three cables running through the integrated adapter to ports 1 3 in any order on the replacement LNB Tighten each cable until fingertight and then use a 7 16 wrench to tighten a quarter turn more RPSK01H Using the supplied dual coax cable connect the ends with red heat shrink wrapping to Port 1 on LNB and Port ...

Page 3: ...should be in front of the LNB and should not be touching the LNB Install the four bolts through the four holes in the LNB guard Thread a nut onto each bolt and tighten RP SK09 DIRECTV SWM SLIMLINE LNB REPLACEMENT 1 Remove and set aside the four nuts and bolts holding the LNB guard to the feed arm Then slide the LNB guard down the feed arm and toward the reflector 2 Remove and set aside the two scr...

Page 4: ...n 6 Slide the LNB guard onto the feed arm and over the LNB The front of the LNB guard should be in front of the LNB 7 Install the four bolts through the four holes in the LNB guard Thread a nut onto each bolt and tighten STOWING THE ANTENNA 1 Plug in the interface box 2 Press and hold POWER for two seconds to turn on the interface box Then press the Power button again to stow the antenna Four coax...

Reviews:

No comments

Related manuals for TRAV'LER RP-SK01 Series

Brand: M2 Antenna Systems Pages: 7

Sailor 900 VSAT

Brand: COBHAM Pages: 356

Brand: Core Innovations Pages: 11

DISH Tailgater Pro VQ4900

Brand: KING Pages: 32

Brand: A.H. Systems Pages: 16

Brand: Queclink Pages: 8

Brand: NETGEAR Pages: 12

Brand: THOMSON Pages: 38

Brand: CommScope Pages: 6

Brand: CommScope Pages: 8

Brand: Televes Pages: 2

InnovaBoss 130201

Brand: Televes Pages: 20

Brand: Simrad Pages: 20

Brand: Winegard Pages: 8

Brand: Ercogener Pages: 35

Brand: Laird Pages: 2

Brand: A.H. Systems Pages: 13

Brand: MPB Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands