®
Date:
July 7, 2011
Bulletin Topic:
eNet660S Setup for Operation with Broadvox IP Trunks
Bulletin Number:
eNet
660S-TB-0006
Broadvox IP Trunk Setup
The eNet660S in cooperation with Broadvox has completed testing for interoperability
with the Broadvox IP network. The following are the setup instructions for configuring
the eNet660S server to operate with Broadvox IP trunks.
The following instruction make the assumption that the eNet660S server is configured,
powered up, and that the servicing technician is trained on the installation and
programming of the eNet660S. Further, the dealer represented by the installing
technician must be authorized to sell and install the eNet660S by WIN or one of WIN’s
authorized affiliates.
Before setting up the eNet660S you will need to obtain a provisioning document from
Broadvox. It will be titled Broadvox Provisioning and will be in Word format. You will
not be able to proceed with the setup without this document.
1
Make sure you have a computer that is configured for the same physical segment
as the eNet660S. The default IP address for the server is 192.168.1.200 with a
subnet mask of 255.255.255.0. Therefore, your computer must be assigned an IP
address on the same physical segment. An example of this would be an IP
address such as 192.168.1.X where X is in the range of 1-253 but not
192.168.1.200 or 192.168.1.254.
2
Next connect the LAN ports of the eNet660S and the computer to a multi port
switch.
3
Make sure that the eNet660S server is powered up and fully operational.
4
Open a browser such as Internet Explorer or Firefox.
5
In the navigation dialog box inter the IP address of the eNet660S server
6
If you have entered the IP address correctly, you will in a short period of time see
a Name and Password box pop up.
7
In this box enter the administrators name and password.
8
the next screen you see will be the following:
