Whitecroft Lighting Limited
Burlington Street, Ashton-under-Lyne, Lancashire OL7 0AX
Tel44 (0)870 5 087 087 Facsimile: +44 (0)870 5 084 210
Registered No. 3848973 England
Registered Office:
As above
Cygnus SY
Installation Leaflet
October 2015 - Rev B
GENERAL INFORMATION
1) Please follow the instructions overleaf in sequence.
2) A qualified electrician, in accordance with IEE wiring regulations, should carry out
connection to mains wiring.
3) TURN THE POWER OFF DURING MAINTENANCE!
4) Ensure that the rated voltage and frequency requirements are compatible with the
available mains supply.
5) Damaged components must be replaced with new ones of the same type.
6) Always make sure the diffuser surface is cleaned of dirt and other foreign matter.
7) Cleaning of reflectors and lenses should be carried out using clean, soft and lint
free cloths and anti-static cleaning fluid.
8) Suitable for indoor and outdoor installation.
9) Photobiological safety: Exempt group at a distance of 1.5m, according to EN
62471:2008
10) The LED light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similarly qualified person.
11) Replaced damaged protective shields with manufacturers spare parts only.
12) The LED luminaires are protected against overvoltage, such as electrostatic
discharge, with protective impedance made to comply with BS EN 60598.
13) Some luminaires installed in outdoor environments may experience a build-up of
internal condensation. This is due to a difference in temperature between inside
and outside the luminaire which is quite common and acceptable under BS EN
60598.
Please note: All images shown are for illustration
purposes and should be used as a reference guide only.
TECHNICAL SUPPORT
Tel: 0161 331 5700
E-mail:
www.whitecroftlighting.com
PK/LEAF/CYGNSY
Fig.8 Orientation /
alignment of fittings.
