background image

29" (73.7 CM) ELECTRIC DRYER

INSTALLATION INSTRUCTIONS

INSTRUCCIONES DE INSTALACIÓN PARA LA SECADORA

ELÉCTRICA DE 29" (73,7 CM)

DRYER SAFETY

Table of Contents / Índice

DRYER SAFETY ........................................................1

INSTALLATION INSTRUCTIONS ............................2

Tools and Parts ......................................................2
Location Requirements .........................................2
Electrical Requirements .........................................4
Electrical Connection .............................................5
Venting Requirements..........................................10
Plan Vent System .................................................11
Install Vent System...............................................12
Install Leveling Legs.............................................12
Connect Vent .......................................................12
Level Dryer ...........................................................12
Reverse Door Swing (Optional)............................12
Complete Installation ...........................................13

SEGURIDAD DE LA SECADORA ........................... 14

INSTRUCCIONES DE INSTALACIÓN .................... 15

Herramientas y piezas........................................... 15
Requisitos de ubicación ....................................... 15
Requisitos eléctricos............................................. 16
Conexión eléctrica ................................................ 18
Requisitos de ventilación ...................................... 23
Planificación del sistema de ventilación ............... 24
Instalación del sistema de ventilación .................. 25
Instalación de las patas niveladoras..................... 25
Conexión del ducto de escape............................. 26
Nivelación de la secadora..................................... 26
Cómo invertir el cierre de la puerta (opcional)...... 26
Complete la instalación......................................... 27

You can be killed or seriously injured if you don't immediately 
 

You

 

can be killed or seriously injured if you don't follow 

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety 
messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

8577188

Summary of Contents for LER4634EZ1





























Reviews: