background image

1

2

3

4

5

6

Emptying condensation

Empty the container 

after

 every use.

1.

Remove the condensate container and hold it 
level.

2.

Open the locking cap.

3.

Pour out the condensation.

Check the valve in the condensate container for dirt:
If there are fluff deposits on the valve

a

 rinse the valve under running

 water. Also pour some tap water into the empty condensate 
container then pour it out again through the valve.
To do this, press the valve in and allow all the water to drain out.

4.

Regularly remove any deposits in the locking cap hole 
using a pointed object.

5.

Close the locking cap.

6.

Always push the tank fully back in until it locks in place.

If the 

Container empty 



/ Clean 

.

/

Ä

indicator light comes on 

after emptying the container 

a

see page 10

.

Cleaning the fluff filter

Clean the fluff filter after every use.

1.

Open the door. Remove any fluff from the door/around the door and pull 
out the fluff filter. 

2.

Remove the fluff from the shaft of the fluff filter. Ensure that no fluff falls 
into the open shaft.

3.

Open the fluff filter and remove the fluff (sweep your hand over the fluff 
filter). If the fluff filter is very dirty or blocked, rinse with warm water and 
dry thoroughly.

4.

Close and reinsert the fluff filter.

Switching off the dryer

Set the programme selector to 

Off

.

Do not leave laundry in the dryer.

Removing the laundry

Your dryer has an automatic anti-crease function. The drum is moved at set intervals for 30 minutes after 
the programme has ended. Laundry remains loose and fluffy (for 90 minutes, if additional 

Easy Iron

function is selected - 

depending on model

).

Container empty 



/

Clean

.

/

Ä

Lit

a

 empty the container for condensation.

Flashes

a

 clean the fluff filter and/or air cooler.

ˎ

V

÷

Gentle

Reduced temperature for delicate fabrics 

'

, e.g. polyacrylic, 

polyamide, elastane or acetate; for longer drying times.

ˎ

S

 Easy Iron

Reduces creasing and prolongs the anti-creasing phase 
after the programme has finished.

End of programme

as soon as 

Ready/Anti-Crease

/

4

 indicator light flashes

Adding or removing laundry

The drying cycle can be interrupted in order to add or remove laundry.
The programme must then be continued or ended.

The drum and the door may be hot!

1. Open the door. The drying process is interrupted.
2. Load or remove laundry and close the door.
3. If required, select a new programme and additional functions.
4. Press the 

Ĕ

Start

/Stop button.

... and adapt to individual requirements

Never operate the dryer if it is damaged.
Inform your after-sales service.

Inspecting

the dryer

Sorting and loading laundry

Remove all objects from pockets.
Pay particular attention to cigarette lighters.
The drum must be empty before filling.

Your new dryer

Congratulations

 - You have chosen to buy a modern, high-quality 

Bosch domestic appliance.
A distinctive feature of your dryer is its low energy consumption.

Every dryer which leaves our factory is carefully checked to ensure 
that it functions correctly and is in perfect condition. 
Should you have any questions, our after-sales service will be pleased 
to help.

Environmentally-responsible disposal

This appliance is labelled in accordance with European Directive
2012/19/EU concerning used electrical and electronic appliances 
(waste electrical and electronic equipment - WEEE). The guideline 
determines the framework for the return and recycling of used 
appliances as applicable throughout the EU.

For further information about our products, accessories, spare parts 
and services, please visit: www.bosch-home.com

Intended use

Contents

Page

ʋ

Preparation   . . . . . . . . . . . . . . . . . . . . . .  2

ʋ

Setting the programmes . . . . . . . . . . . . .  2

ʋ

Drying   . . . . . . . . . . . . . . . . . . . . . . . .  3/4

ʋ

Notes on laundry  . . . . . . . . . . . . . . . . . .  5

ʋ

Care and cleaning  . . . . . . . . . . . . . . . . .  6

ʋ

Overview of programmes   . . . . . . . . . . .  7

ʋ

Installation  . . . . . . . . . . . . . . . . . . . . . . .  8

ʋ

Frost protection / Transport . . . . . . . . . .  8

ʋ

Technical data  . . . . . . . . . . . . . . . . . . . .  9

ʋ

Optional accessories  . . . . . . . . . . . . . . .  9

ʋ

What to do if... / After-sales service  . . . 10

ʋ

Safety instructions  . . . . . . . . . . . . . . . . 11

Preparing for 

installation, see page 8

Selecting and adjusting the programme

Drying

Condensate container

Control panel

Care and cleaning

Dryer cabinet, control panel, air cooler, moisture sensors

– Wipe off with a soft, damp cloth.
– Do not use abrasive cleaners or solvents.
– Remove detergent and cleaning agent residue immediately.

Clean the air cooler 5 to 6 times a year

 or if 

Container empty 



/ Clean 

.

/

Ä

 flashes after cleaning the fluff filter.

Air cooler

In order to clean it, the air cooler must be removed.
– Allow the dryer to cool.
– Residual water may leak out, so place an absorbent towel underneath 

the maintenance door.

1.

Unlock the maintenance door (1).

2.

Fully open the maintenance door (2).

3.

Turn both locking levers outwards (1).

4.

Pull out the front insert (2).

5.

Remove the air cooler.

Take care not to damage the air cooler.
When cleaning, use warm water only. Do not use hard or sharp-edged objects.

6.

Clean the air cooler thoroughly and allow the water to drain off.
Clean the seals.

7.

First insert the air cooler (handle at the bottom) and then the front insert.

8.

Turn back both locking levers.

9.

Lock the maintenance door.

Moisture sensors

The dryer is fitted with stainless steel moisture sensors. The sensors measure the level of 
moisture in the laundry. After a long period of operation, a fine layer of limescale may form 
on the sensors.

1.

Open the door.

2.

Clean the moisture sensors using a slightly damp sponge with a rough 
surface.

Do not use steel wool or abrasive materials.

Select the drying programme ...

Press the 

 Start/Stop button

1

2

3

Only if your hands are dry. 
Only hold the plug by the plug 
casing.

Connecting the

mains plug

Drying

Information on laundry ...

Labelling of fabrics

Follow the manufacturer's care information.

(c

Drying at normal temperature.

'c

Low-temperature drying 

a

 in addition, select 

V

Gentle

.

)c

Do not machine dry.

Be sure to follow the safety instructions 

a

see page 11

!

For example, do not use the dryer for the following fabrics:
– Airtight fabrics (e.g. rubber-coated fabrics).
– Delicate materials (silk, curtains made from synthetic material) 

a

 they may crease.

– Laundry contaminated with oil.

Before drying for the first time

– Do not put any laundry in the dryer. Set the programme selector to a timed programme 

(

a

see page 7

) and select 

Ĕ

Start

/Stop. When the programme has finished, set the 

programme selector to 

Off

.

Drying tips

– To ensure a consistent result, sort the laundry by fabric type and drying programme.
– Always dry very small fabrics (e.g. baby socks) together with large items of laundry 

(e.g. hand towels).

– Fasten zips, hooks and eyelets, button covers and tie together cloth belts, strips, etc.
– Do not overdry easy-care laundry 

a

 risk of creasing. Allow laundry to finish drying in 

the air.

– Do not iron laundry immediately after drying, fold items up and leave for a while 

a

 the remaining moisture will then be distributed evenly.

– Knitted fabrics (e.g. T shirts, knitwear) often shrink when tumble dried for the first time

a

 do not use the 

+

:

c

Very Dry

 programme. 

– Starched laundry is not always suitable for dryers 

a

 starch leaves behind a coating that 

adversely affects the drying operation.

– Use the correct dosage of fabric softener as per the manufacturer's instructions when 

washing the laundry to be dried subsequently.

– Using a timed programme with a small laundry load 

a

 optimisation of the drying result.

Environmental protection / Energy-saving tips

– Before drying, spin the laundry thoroughly in the washing machine 

a

 the higher the spin 

speed, the shorter the drying time will be (consumes less energy), also spin easy-care 
laundry.

– Use the maximum recommended fill level but do not overload laundry

a

overview

of programmes, see page 7

.

– Make sure the room is well ventilated during drying.
– Clean the fluff filter after every drying cycle 

a

 see page 4.

– Do not block or seal the air inlet.

Only when the appliance is 
switched off.

Drum

Programme selector

Only operate the dryer 
with the fluff filter inserted.

Air inlet

Fluff filter

ʋ

exclusively for domestic use,

ʋ

only for drying fabrics which have been washed using 
water.

Keep children younger than 3 years old away from 
the dryer.
Do not let children make the cleaning and 
maintenance work on the dryer without supervision.

Do not leave children unsupervised near the dryer.
Keep pets away from the dryer.
The dryer can be operated by children 8 years old 
and older, by persons with reduced physical, 
sensory or mental abilities and by persons with 
insufficient experience or knowledge if they are 
supervised or have been instructed in its use by 
a responsible adult.
This appliance is intended for use up to a maximum 
height of 4000 metres above sea level.

For a detailed programme overview, 

a

 see page 7.

Before using the dryer for the first time

run the drying cycle without any laundry 

a

see page 7

.

Additional functions/status

and service indicators

Read these instructions before operating the dryer.

 Observe the safety instructions on page 11.

Summary of Contents for WTC84100IN









Reviews: