PROGRAM menu :
By pressing
&
keys the Program number starts to blink,
and use
&
to see the
Then use
&
to
other days in the program
Select the program
Shows the daily program
If you select a built-in program “
P1
to
P9
” and press
this program will be followed in
Built-in programs description
P1
Morning, Evening & Week-end
P6
Morning, Afternoon & Week-end
P2
Morning, Midi, Evening & Week-end
P7
7h - 19h (Office)
P3
Day & Week-end
P8
8h - 19h , Saturday (Shop)
P4
Evening & Week-end
P9
Week-end (Secondary House)
P5
Morning, Evening (bathroom)
If you select a built-in program
”U1
to
U4”
and press
you will enter in user program edition.
USER PROGRAM EDITION
day
Hour at the cursor position
The
key sets
temperature at the current blinking program hour
The
key sets temperature at the current blinking program hour
Use
W
X
keys to slide the blinking cursor position in the day and modify or correct easily the
program. When the displayed day is correct press
OK
to jump to the following day.
When you press
on day 7 you return to the top menu
Now your user program will be followed if you put the
MILUX RF
in
operating mode.
Set CLOCK Menu :
Use this menu to adjust the clock .
Use
&
to
ajust the minutes.
Press
key
Use
&
Adjust the hours.
Press
key
Use
&
Adjust the day
Press
key
COMFORT operating mode :
By pressing
&
keys the comfort
temperature starts to blink and can be adjusted.
The room temperature
reappears after a few
seconds
The
MILUX RF
regulation will now follow
indefinitely the comfort temperature.
AUTOMATIC operating mode:
MILUX RF
will follow automatically the program
according to the actual time
By pressing
&
key you can override the
current set temperature until the next change in
the program.
The
segment will lit up. Use
&
keys
to adjust the temporary required temperature.
At the next program change the
will
disappear and the program continues without any
alteration.
RADIO CONFIGURATION WITH THE RECEIVER
1.
To assign the MILUX RF thermostat with the receiver you must put the receiver in “
RF init
”
mode, please refer to the receiver leaflet.
(In this mode the thermostat should be near the
receiver)
2.
On the MILUX RF, select
operating mode.
Then press the
key during 5 seconds,
you will enter in the Radio configuration mode (
).
The MILUX RF is now sending by radio signal its configuration address 4 times per second,
3.
You can now perform a radio range verification.
Place the MILUX RF in the room where you need to regulate the temperature and leave it in
Radio configuration mode (
).
Close the doors and come back to the Receiver.
Verify that the green LED blinks at each radio signal received :
- If it blinks regularly 4 times per second, the installation of the MILUX RF and Receiver is
correct.
- If it blinks irregularly, you are at the range limit. Install the MILUX RF closer to the Receiver.
- If it does not blink at all, you are out of range. Install the MILUX RF closer to the Receiver.
4.
On the MILUX RF press on the
key to exit the Radio configuration mode.
Now your MILUX RF controls the Receiver.
•
Wireless communication by radio
signal to the receiver connected to the
installation.
Range of approximately 30m in
residential environment.
•
7 day program
•
9 Built-in programs and 4 User
programs
•
Program graphic display
•
Room temperature and time display
•
Comfort / Reduced / Anti-freeze
temperatures
•
Temporary temperature override
•
Automatic or Manual operation
•
Holiday
function
•
Keypad lock function (child safety)
•
Battery operated, life >2 years
•
Battery
weakness
display
•
Battery replacement without loss of
the program memory (<1minute)
•
Reset
function
•
ITCS function (optional). Intelligent
Temperature Control System.
1:
Heater in operation
2:
Temperature overridden
3:
Holiday function activated
4:
Operating mode menu
5:
Batteries weak
6:
Day of the week
7:
Time
8:
Current day graphic program display
and radio transmission activity
9:
If lit-up 10 display the current room temperature
10:
Room temperature or set temperature
REDUCED operating mode :
By pressing
&
keys the comfort
temperature starts to blink and can be
adjusted.
The room temperature
reappears after
a few seconds
The
MILUX RF
regulation will now follow
indefinitely the reduced temperature.
ANTI FREEZE operating mode:
Prevent your installation from freezing.
By pressing
&
keys the anti freeze
temperature starts to blink and can be
adjusted.
The room temperature
reappears after a
few seconds
Now the
MILUX RF
will keep the
temperature above freezing.
OFF mode :
Use this mode if your Heating installation
needs to be turned OFF.
The MILUX RF will switch off the
installation and then switch itself OFF
(blank screen).
User programs are saved, time is kept
running and battery consumption becomes
very low.
Any key will wake up the MILUX RF.
The
key display the actual room
temperature.
DANGER: has your thermostat is
stopped YOUR INSTALLATION CAN
FREEZE.
HOLIDAY Function :
With
W
X
keys, go to
function. Then select with
&
keys the delay in hours (
H
) if
below 24h then in days (
d
). Then select a mode
or
or
.
The
logo is active and the number of hours/days left is displayed until the MILUX RF
returns in
mode and continues to follow the program.
KEYPAD LOCK Function :
Function to prevent any modification of the parameters.
In
,
,
,
and
operating modes you can maintain the
key pressed and
press simultaneously on the
or
key to lock (
) or unlock (
) the
keypad.
RESET Function :
Erase all user programs and sets the factory parameters by default.
Go to
mode, maintain
&
keys pressed and press simultaneously on the
key.
All segments will lit up during a few seconds showing that the MILUX RF has been erased and
restarted with factory defaults parameters.
Factory parameters are :
Temperatures
21°C
17°C
6°C, Program
U1
all comfort.
CHARACTERISTICS
MODES DESCRIPTION
DISPLAY
SPECIAL FUNCTIONS
USER GUIDE
GB
Use
&
keys to change the mode in the Operating mode menu
For all operating modes the receiver switch should be placed on
AUTO
position.
Chrono-Thermostat MILUX RF
8
1
2
3
4
5
6
7
9
10
PPL IMP 1237A
TECHNICAL CHARACTERISTICS
Measured temperature
precision
0.1°C (or 0.2°F)
Set temperature precision
0.5°C (or 0.5°F)
Set temperature range
in comfort & reduced : 5°C – 35°C (or 41°F – 95°F)
in anti-freeze :
0,5°C – 10°C (or 33°F – 50°F)
Regulation
characteristics
Cycle: 15
minutes
Anti-short cycle:
3 minutes OFF, 2 minutes ON
Electrical Protection
Class II - IP30
Batteries
3x LR6 AA 1.5V alkaline batteries (> 2 years)
IMPORTANT: You have 1 minute to change the batteries.
Past this time, you may have to reprogram your thermostat if
all segments lit up at power up.
Radio Frequency
433.92 MHz, <10mW.
Certifications
CE. EN 300220-3, EN 301489-1
(Radio frequency certifications)
