background image

1

When using your telephone equipment, basic safety precautions should always
be followed to reduce the risk of fire, electric shock and injury to persons, including
the following:

1.

Read and understand all instructions.

2.

Follow all warnings and instructions marked on the product.

3.

Unplug this product from the wall outlet before cleaning. Do not use liquid
or aerosol cleaners. Use a damp cloth for cleaning.

4.

Do not use this product near water (for example, near a bath tub, kitchen
sink, or swimming pool).

5.

Do not place this product on an unstable cart, stand, or table. The product
may fall, causing serious damage.

6.

Slots and openings in the Handset and Base Unit are provided for
ventilation. To protect it from overheating, these openings must not be
blocked by placing the product on a bed, sofa, rug, or other similar
surface. This product should never be placed near or over a radiator
or heat register.  This product should not be placed in a built-in installation
where proper ventilation is not provided.

7.

This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your dealer or local power company.

8.

Do not allow anything to rest on the power cord. Do not install this product
where the cord might be damaged by anyone walking on it.

9.

Never push objects of any kind into this product through holes and slots
in the Handset and Base Unit as they may touch dangerous voltage points
or short out parts that could result in a risk of fire or electric shock. Never
spill liquid of any kind on the product.

10.

To reduce the risk of electric shock, do not disassemble this product,
but take it to an authorized service facility. Opening or removing cabinet
parts other than specified access doors may expose you to dangerous
voltages or other risks. Incorrect reassembling can cause electric shock
when the appliance is subsequently used.

11.

Do not overload wall outlets and extension cords as this can result in
the risk of fire or electric shock.

Important Safety Instructions

Summary of Contents for 2652

















































Reviews: