ASSEMBLY INSTRUCTIONS
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A
LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN
FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS
ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
1.
CORD COVER ASSEMBLY (See Fig. 1)
1. Remove all parts carefully from the box. Screw threaded nipple of cord cover
(D) into bottom threaded opening of back plate (C).
2. Thread cord cover (E) into cord cover (D), thread cord cover (F) to cord cover
(E) and hand tighten.
3. Measure center points between both mounting holes at back of fixture
base (C). Mark two points with same distance on the wall, make sure they are
vertical with each other.
4. Drill small holes at both points, hole should be big enough to accommodate
with plastic anchors (A). Install plastic anchors (A) into the holes in the wall.
5. Insert mounting screws (B) into plastic anchors (A), make sure screw head
1/8” threads are visible. Hook fixture base (C) onto both screws (B). Place
shade (L) onto the top of socket (J) and tighten with socket ring (K).
6. Insert light bulb into socket. Remove plastic cover (H) from plug (G). Plug
lamp into wall outlet.
ADJUSTMENT INSTRUCTIONS
1. Loosen adjustment keys (M) found on the swivel.
2. Adjust lamp arm and socket to desired position.
3. Tighten the adjustment keys.
DRY
Boston Functional Double Arm Library Light
Item # SL2923
