Viale Vicenza 14
36063 Marostica VI - Italy
www.vimar.com
30801-xx591 01 2204
Connected electronic control
LINEA
30801
EIKON
20591.0
PLANA
14591.0-14591
ARKÉ
19591.0-19591
30801-20591.0-19591.0-14591.0: to be completed with two interchangeable half-button
caps: 1 module.
19591-14591: complete with buttons.
The device is equipped with two front buttons capable of calling up one or two scenarios.. It is
configured in the Bluetooth technology system via the View Wireless App and thanks to gateway
30807.x-20597-19597-16497-14597 it is designed recall scenarios created with the View App.
The front buttons can be configured for the following function:
Scenario recall control
Pressing: recalling of scenario associated with the upper button (UP button) or recalling of sce-
nario associated with the lower button (DOWN button).
Download the View Wireless
App from the stores onto the tablet/smartphone you
will be using for configuration.
When the device is powered for the first configuration, we recommend you search for any
new firmware and perform the update.
You will also need:
Gateway art. 30807.x-20597-19597-16497-14597
CONFIGURATION IN
1.
Create your account on MyVimar (on-line).
2.
Wire all the devices in the system (2-way switches, relays, thermostats, controls, gateway, etc.).
3.
Start the View Wireless App and log in with the credentials you just created.
4.
Create the system and the environments.
5.
Associate all the devices with the environments, except for the gateway (which should be
associated last).
To associate the connected control:
• Select “Add” (
), choose the environment to place it and give it a name
• Select ; activate the Bluetooth connection on your tablet/smartphone and approach the
device
• Simultaneously press the UP and DOWN buttons and set the desired function
6.
For every device, set the function, the parameters and any accessory devices (wired or radio
control and related function).
7.
Transfer the configuration of the devices to the gateway and connect it to the Wi-Fi network.
8.
Transfer the system to the Administrator user (who must have created his/her profile on
MyVimar).
For details please refer to the View Wireless App manual you can download from www.
vimar.com
DOWNLOAD
View Wireless MOBILE
App
RESETTING THE DEVICE
The reset restores the factory settings. Within the first 5 minutes from powering, simultaneously
press the UP and DOWN buttons for 30 s until the white LED flashes.
INSTALLATION RULES.
• Installation and configuration must be carried out by qualified persons in compliance with the
current regulations regarding the installation of electrical equipment in the country where the
products are installed.
• The device must be protected against overloads by installing a device, fuse or automatic 1-way
switch, with a rated current not exceeding 10 A.
• The device must be completed with interchangeable buttons and installed in flush mounting
boxes or surface mounting boxes with Linea, Eikon, Arké and Plana mounting frames and cover
plates.
• Installation must be carried out with the system switched off.
Install the buttons onto the
connected control before powering up the system.
CHARACTERISTICS
• Rated supply voltage: 100-240 V~, 50/60 Hz.
• Power consumption: 5 mA
• RF transmission power: < 100 mW (20 dBm)
• Frequency range: 2400-2483.5 MHz
• Terminals: 2 (L and N) for line and neutral
• 2 front buttons that are used both for control and as configuration push buttons.
• RGB LED which signals pressing the button (which can be set from the View Wireless App) and
the configuration status (flashing blue)
• Operating temperature: -10 ÷ +40 °C (indoor)
• Protection degree: IP20
• Configuration via View Wireless App for Bluetooth technology system
OPERATION.
N.B.: The device works as a repeater node for battery-operated devices (for instance art.
03980).
Settings.
The View Wireless App can be used to set the following parameters:
- RGB LED for backlighting: colour can be selected from a default list (default: white for Linea,
amber for Eikon, blue for Arké and green for Plana).
- LED brightness: OFF, low, medium, high for button pressing indication (default: high) and for
device on standby (default: off).
REGULATORY COMPLIANCE.
RED Directive. RoHS directive.
Standards EN 60669-2-1, EN 301 489-17, EN 300 328, EN 62479, EN IEC 63000.
Vimar SpA declares that the radio equipment complies with Directive 2014/53/EU. The full text
of the EU declaration of conformity is on the product sheet available on the following website:
www.vimar.com
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead.
WEEE - User information
The crossed bin symbol on the appliance or on its packaging indicates that the product at the end of its life must be collected separately
from other waste. The user must therefore hand the equipment at the end of its life cycle over to the appropriate municipal centres for the
differentiated collection of electrical and electronic waste. As an alternative to independent management, you can deliver the equipment you
want to dispose of free of charge to the distributor when purchasing a new appliance of an equivalent type. You can also deliver electronic
products to be disposed of that are smaller than 25 cm for free, with no obligation to purchase, to electronics distributors with a sales area
of at least 400 m
2
. Proper sorted waste collection for subsequent recycling, processing and environmentally conscious disposal of the old
equipment helps to prevent any possible negative impact on the environment and human health while promoting the practice of reusing and/
or recycling materials used in manufacture.
FRONT AND BACK VIEW
UP Button
DOWN Button
LED
N
L
Terminals not in use
6 mm
L
N
000
30804
20591.0-19591.0-19591
14591.0-14591
