background image

2

VICTORINOX SWISS ARMY INSTRUCTIONS FOR USE

I. GENERAL INFORMATION

– Disposal of used batteries

3

– Rotating bezel

4

– Water resistance

4-5

– Meter/bar correlation

5

II. INSTRUCTIONS FOR USE

– Setting the date and time

6

– Manual or automatic winding

7

III. OTHER FUNCTIONS

– Chronograph

7-8

– Tachymeter timer

8

– 2nd Time Zone

9

– Dual time

9

– Alarm

10

English

I. GENERAL INFORMATION

Congratulations on having chosen a Victorinox Swiss Army timepiece. To ensure your
timepiece operates perfectly, we recommend that you follow the advice given in
these instructions.

Your timepiece is fitted with either a screw-down or a “pull-out” crown. In order to
establish which, gently try to pull the crown out to position 2, if that works, your
timepiece is fitted with a “pull-out” crown. If not, use your thumb and forefinger to
apply mild pressure on the crown, while rotating towards you to release it. If it does
so, you have a screw-down crown.

After use, push the crown back in or screw it down until it is secure in

order to maintain the water resistance of your timepiece.

Quartz timepieces are battery-operated. When the battery is exhausted, we recom-
mend that you have it replaced immediately at an authorized Victorinox Swiss Army
Service Center where the water resistance of your timepiece will also be checked.
The battery is not covered by the warranty.

COLLECTION AND DISPOSAL OF QUARTZ TIMEPIECE BATTERIES*

This symbol indicates that this product must not be thrown away
with household rubbish. It must be disposed of at an authorized
battery disposal point. By doing so you will be protecting the envi-
ronment and human health. Recycling conserves natural resources.

*Applicable in EU member countries and countries with similar leg-
islation.

English

3

Summary of Contents for SwissArmy






Reviews: