background image

accessories

control accessories

Vex-RC Transmitter & Receiver Kit

Vex-RC Transmitter & Receiver Kit •

 1

For More Information, and additional Parts & Pieces refer to:

www.VexRobotics.com

Limited 90-day Warranty
This product is warranted 
by Innovation First against 
manufacturing defects in 
material and workmanship 
under normal use for ninety 
(90) days from the date of 
purchase from authorized 
Innovation First dealers. 
For complete warranty 
details and exclusions, 
check with your dealer.

Innovation First, Inc.
1519 IH 30 W
Greenville, TX 75402

08/07

The Transmitter & Receiver Kit provides the foundation for a new robot.

  Use this kit along 

with motion and structure components to create a remote-control robot.  This transmitter & 
receiver pair is part of the Vex-RC “blue” product line.  For more information on compatibility, 
refer to 

www.VexRobotics.com

.

(1x) Vex-RC Transmitter 

Antenna

(1x) Vex-RC Receiver

(1x) Vex-RC 

Transmitter

(1x) Vex Battery Box

Warning:

 

 

Changes or modifications to this 

unit not expressly approved by the party 
responsible for compliance could void the user 
authority to operate the equipment.

NOTE

:

 

 This equipment has been tested and 

found to comply with the limits for a Class 
B digital device, pursuant to Part 15 of the 
FCC Rules.  These limits are designed to 
provide reasonable protection against harmful 
interference in a residential installation.  This 
equipment generates, uses and can radiate 
radio frequency energy and, if not installed 
and used in accordance with the instructions, 
may cause harmful interference to radio 
communications.

However, there is no guarantee that interference 
will not occur in a particular installation.  If this 
equipment does cause harmful interference to radio 
or television reception, which can be determined 
by turning the equipment off and on, the user is 
encouraged to try to correct the interference by 
one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment 

and receiver.

• Connect the equipment into an outlet on a circuit 

different from that to which the receiver is 
connected.

• Consult the dealer or an experienced radio/TV 

technician for help.

Summary of Contents for Vex-RC Transmitter & Receiver Kit

Page 1: ...ot expressly approved by the party responsible for compliance could void the user authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates us...

Page 2: ...or screw from the bottom of the Transmitter Remove the battery door and insert a 9V battery not included Make sure you install the battery with the polarity in the correct orientation Reinstall the battery door and screw Remove the cover from the Battery Box and install 6x AA Batteries not included Make sure you install the batteries with the polarity in the correct orientation follow the guide in...

Page 3: ...me voltage as the battery whenever the Receiver is switched on These ports are intended to be used for passive accessories that need a power supply the Vex Color Camera 276 2211 and the Vex Flashlight 276 2210 both utilize these AUX ports If you plug a motor into an AUX port it will run continuously whenever the robot is turned on The Vex RC system uses the VB 1 Motor Module not included in this k...

Page 4: ...s have internal protection which will shut down the motor to protect it from overload Problem One motor is running opposite of the desired direction Solution Reverse the direction of the motor plug that connects to the Receiver See previous page Problem System has limited signal range less than 150 feet Possible Solutions Check that the Transmitter Antenna is completely extended and secured tightl...

Reviews: