![background image](http://html1.mh-extra.com/html/venture-lighting/select-pro-series/select-pro-series_user-manual_1002784001.webp)
V
ENTURE
L
IGHTING’S
S
ELECT
-
P
RO
M
ODERN
H
IGHBAY
Before You Begin
READ THESE INSTRUCTIONS COMPLETELY AND CAREFULLY
UNPACKING
Unpack and carefully examine the product.
Report any damage and save all packing materials if any part(s) were damaged during shipping.
Do not attempt to install or use this equipment if it is damaged.
INCLUDED IN THIS BOX
LED Fixture
Carabiner and Safety Cable
Installation instructions
WARNING
–
RISK OF FIRE, ELECTRIC SHOCK, INJURY, OR PROPERTY DAMAGE
Failure to follow these instructions or altering equipment could result in injury or damage and void warranty. Venture assumes no liability for injury, damages
or losses of any kind that may arise from the improper, careless, or negligent installation, handling or use of this product.
This equipment must be installed and serviced per applicable codes and ordinances by qualified personnel (ex. licensed electrician) familiar with the
operation of the product and any hazards involved.
Disconnect power to the equipment and allow to cool before installing or servicing.
Handle sharp edges with care. To prevent wiring damage, do not expose wiring to sharp edges.
Verify that all electrical connections have been properly made and the fixture is grounded to avoid potential electrical shocks.
It is the installers responsibility to confirm the proper input voltage is used with this equipment.
Do not handle energized equipment when hands are wet, when standing on wet surfaces, or in water.
This fixture must be mounted securely to a structure to support the weight.
SUPPLIER’S DECLARATION OF CONFORMITY (SDoC)
This equipment complies with the limits for a Class A digital device, pursuant to Part 15 Subpart B of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial, industrial, or business environment.
This equipment complies with the limits for a Class A lighting equipment, pursuant to Innovation, Science and Economic Develo
pment Canada’s CAN ICES
-005
(A) / NMB-005 (A).
For warranty information refer to www.venturelighting.com/resources/warranties.
IMPORTANT SAFETY INFORMATION
Operating temperature: -40°C to +40°C (-40°F to +104°F).
Suitable for use in wet locations.
All wiring and connectors used with this equipment shall be rated a minimum of 75°C (167°F).