ATTENTION Receiving Department:
Note actual fixture description of any shortage or noticeable damage on delivery receipt. File claim for common carrier
(LTL) directly with carrier. Claims for concealed damage must be filed within 15 days of delivery. All damaged material,
complete with original packing must be retained.
VRVT3 Description
The VRVT3 LED is a Vaportite fixture using a reinforced fiberglass housing with a high impact diffuser. The fixture is
suitable for interior and exterior applications and can be surface or chain mounted. The VRVT3 LED has been designed
for maximum operation in commercial institutional and industrial environments and is suited for ambient temperatures
of -20°C to 25°C, with some models rated to 55C. It is also rated for wet locations and has IP ratings of IP65, IP66, IP67,
and IP69.
WARNING
Installation Instructions – VRVT3 LED Vaportight Luminaire Installation
Instructions d’installation – Luminaire DEL étanche à la vapeur VRVT3
Instrucciones de instalación – Instalación de la luminaria VRVT3 LED
Vaportight
IB519126EN
Fail-Safe
DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or losses of any kind that may
arise from the improper, careless, or negligent installation, handling or use of this product.
IMPORTANT:
Read carefully before installing fixture. Retain for future reference.
NOTICE:
These instructions do not claim to cover all details or variations in the equipment, procedure, or process
described, or to provide directions for meeting every possible contingency during installation, operation or maintenance.
When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your
nearest representative.
NOTICE:
Proper grounding is required to insure personal safety.
NOTICE:
Fixture may become damaged and/or unstable if not installed properly.
Note:
Specifications and dimensions subject to change without notice.
Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this product
must be performed by a qualified electrician. This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and operation of the product and hazards
involved.
Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or attempting any
maintenance. Disconnect power at fuse or circuit breaker.
Risk of Fire- Minimum 90°C supply conductors.
Risk of Burn- Disconnect power and allow fixture to cool before handling or servicing.
Risk of Personal Injury- Due to sharp edges, handle with care.
Must be very careful if power tools are used to install the fixture. Uncontrolled torque setting may lead to
thread/gasket damage or lens breakage.
Failure to comply with these instructions may result in death, serious bodily injury and property damage.
