background image

Care Instructions - 

Read Before Installation

- This box contains fragile and valuable goods that 
have been carefully packed. Please take utmost care 
in unpacking the parcel as damage can occur in this 
process.
- Please be sure you have received the correct 
number of boxes i.e. 1 of 2, 2 of 2 etc.
- Under no circumstances should the product be 
lifted out by the neck or light fitting.
- If you have received any damaged goods or are 
missing any part of your order, please contact our 
sales office as soon as possible

Recycling

- Recyclable packaging used, please consult with 
your local recycling centre for further information.
- Waste electrical products should not be disposed 
of with conventional household waste. Please 
recycle all parts when possible.

Cleaning Instructions

Brass 

- all types:  Use a soft dry lint free cloth

Bronze, Nickel, Silver & Chrome: 

Use a dry cloth 

only, no chemical cleaners

Glass: 

We recommend using a strong alcohol such as 

isopropyl alcohol. Note: some modern cleaning 
solutions can contain chemicals that can leave a 
greasy film on glass.

Gilt Wood: 

Use a dry cloth only

Ceramic:

 Use a damp cloth only

Wood: 

Wax polish i.e. Antique wax

Alabaster:

 Dust with a soft brush or a clean dry cloth. 

Avoid water or water-based cleaners. Any marks that 
cannot be removed by dusting must be cleaned by a 
specialist.

Lacquered Furniture: 

Furniture polish

Crystal: 

Damp cloth

Card/Laminated Shades: 

Use a Feather duster only

Silk Shades: 

Gently tap to lift dust

Needlework:

 Dry-clean

-Any decorative parts made from other materials 
must be removed and cleaned separately to avoid 
damage - e.g. alabaster. 

After choosing a suitable location that meets all the requirements of 

the safety information install the unit following the steps overleaf.

 

- Carefully unpack all parts and check for damage or missing parts 

before commencing installation.

- Installation of this product must be carried out by a qualified electrical 

contractor.

- Shut off power at the fuse box or circuit breaker box.

- If necessary, remove old fixture and all mounting hardware from the 

junction box.

-Be sure to follow the steps in the order given.

- The supply wires must be rated for at least 90°C

-This product must be installed in accordance with all applicable 

installation codes by a person familiar with the construction and operation of the product and the hazards 

involved.

- Ensure that the support for the luminaire is of sufficient structural strength and that any fixing screws do not 

interfere with the connecting cables.

- The light must be mounted on a non-flammable surface as a fixed luminaire, and is not suitable for portable 

use.

- The unit can get very hot during use. Ensure the unit has cooled before handling.

- Ensure adequate ventilation space is allowed between the unit and any object above, in front or to either 

side of the unit. Suggested minimum space is 19½” above and 19½” on all sides.

- To prevent tarnishing, it is advisable to wear gloves at all times when handling the product.

Safety Information  - Read Before Installation

VAUGHAN 

Installation Guide 

www.vaughandesigns.com

French Chateau Lantern

CL0251

Rev 1

Reviews: