ITEM #0050024
MODEL #SP-045
PACKAGE CONTENTS
HELPFUL TIPS
SAFETY INFORMATION
CARE AND MAINTENANCE
DIGITAL TIMER
YARD STAKE
OPERATING INSTRUCTIONS
3. Reset
There is a reset hole under
the dashboard. Insert a pin
or paperclip end into the
hole to reset the timer. This
will clear all programmed
settings.
4. Set Current Time
1.
Press and hold "TIME" button for 2 seconds to
enter the current time settings. Press "+" or "-"
button to set the correct day.
2. Press the "SET" button to enter the hour setting.
Press "+"or "-" buttons to set the current hour. Be
sure that AM or PM appears correctly.
3. Press the "SET" button to enter the minute
setting. Press the "+" or "-" buttons to set the
current minute.
4. Press the "SET" button to finish setting the
current time and return to normal display.
5. While setting those processes above, press and
hold “SET” button to clear the setting and revert
to the original timer settings. While setting those
processes above, press “TIME” button or wait for
15 seconds to go back to the standby display.
1. Installation
1. Connect the two pieces of
the yard stake together by
screwing the lower stake
(C) into the upper stake
(B).
• OPERATION: Once assembled, plug the yard stake
into a grounded outlet (total wattage should
not exceed 15 amp or 1,875 watts)
Disregarding cautions could cause damage, fire, or
fatal shock. When using outdoor electrical products,
basic safety precautions should always be followed to
reduce the risk of fire, electric shock, and personal
injury.
SPECIFICATIONS:
6FT AWG 14/3 SJTW vinyl cord
RATINGS:
125V, 60Hz, 15A, 1,875W general purpose
• Store indoors in dry location.
• Always unplug when not in use.
• Do not unplug by pulling on cord.
Call customer service at 1-866-994-4148,
8 a.m. - 6 p.m., EST, Monday - Thursday,
8 a.m. - 5 p.m., EST, Friday.
WARRANTY
TROUBLESHOOTING
• For information on product warranty please call
customer service at 1-866-994-4148, 8 a.m. - 6 p.m.,
EST, Monday - Thursday, 8 a.m. - 5 p.m., EST,
Friday.
• This product is guaranteed to be free of defects for
a limited period of one year form the date of
purchase.
• If the product suddenly malfunctions and is not
damaged by external factors or personal reasons
within the one year warranty limit from the day of
purchase, the product maybe considered for repair.
If the product is damaged due to natural disaster like
fire, lightning, flood, hurricane, etc., the product will
not be considered for repair.
(2) this device must accept any interference received,
including interference that may cause undesired
operation of the device.
Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to operate
this equipment.
This equipment has been tested and found to comply
with the limits for Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
the receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
WARNING
A
B
C
PART DESCRIPTION QUANTITY
1
1
A
B
Outlet
Upper Stake
1
C
Lower Stake
2. Attach the assembled
stake to the outlet (A) by
screwing the top of
upper stake (B) into the
base of the outlet.
Be sure to firmly tighten
the stake to the body
before installing into the
ground.
3. Insert the stake 6 inches into the ground.
Plug the yard stake into a GFCI-protected
grounded outlet. (CAUTION: Combined amp load
on all the outlets at any one time must not exceed
1,875 watts).
4. Press the switch to “I”
position
6. Program Settings
Make sure the current mode
is at AUTO mode, then
press and hold "PROG"
button for two seconds to
begin program setting,
using the "+" and "-" buttons
to adjust the setting.
CAUTION
There is a risk of fire when too much power is drawn
from this item. Use only with a total of 15 ampere
maximum Christmas tree or other seasonal lighting
products.
• Risk of fire. Not for permanent installation. Use only
with outdoor equipment, Christmas tree, or other
seasonal decorative-lighting products having a total
of 15 Ampere maximum. Do not install or use this
product for more than a 90-day period.
• If using Christmas tree or decorative-lighting
products that are not marked with an ampere rating,
connect no more than 140 screw-base lamps (C7 or
C9) or 12 strings with push-in lamps to this cord set.
• Cord sets shall be plugged into a GFCI - protected
receptacle.
• If using an outdoor-use cord set for an extended
period of time (greater than 90 days), please consider
hard wiring a permanent outdoor-use receptacle
rated for year-round use in the area that power is
needed. Please contact a licensed electrician for
proper installation of permanent wiring.
• After completion of installation, the connector shall be
maintained a minimum of 6 inches above ground.
• SUITABLE FOR INDOOR/OUTDOOR USE – STORE
INDOORS WHILE NOT IN USE.
• PLUG INTO GROUND FAULT PROTECTED
RECEPTACLE ONLY.
NOTE: Position yard stake away from other light
sources. If it is too close to other light sources, or if the
photocell is facing a light source other than the sun
(such as a porch light or street lamp), the yard stake
may shut off outside of the timer setting you chose. If
this happens, relocate yard stake or eliminate other
light sources. Keep yard stake and power cord out of
common walkways to prevent tripping.
PROBLEM POSSIBLE
CAUSE
CORRECTIVE
ACTION
If lights do
not turn on
at dusk.
It could be timer
is not in a good
area for light
meter to function
as there is too
much ambient
light to detect
darkness.
To correct the
problem, move the
timer to another
location where
there is no ambient
light.
If lights do
not turn on
even when
timer is “ON”
position.
It could be lights
are not in “ON”
position, lights
are not
functioning, or
timer is not
receiving power.
To correct the
problem be sure
that lights are
functional by
plugging them
directly into the
outlet. Be sure that
lights are in “ON”
position if they have
their own switch. Be
sure that timer is
receiving power -
the LED should light
up when plugged
into an outlet and
put in the “ON”
position.
If lights are
flashing
(turning on
and off).
It could be the
timer is in Dusk to
Dawn mode, and
the light from the
plugged-in lights
is affecting the
light sensor.
To correct the
problem, move the
lights away from the
timer, or reposition
the timer so that it
does not face the
lights.
Before initial use, please plug in the outlet (A) for at
least 30 minutes to charge the internal battery. The unit
will be ready for programming after the LCD display
appears.
1. Press "SET" button to
enter the timer time.
Press "+" or "-" button to
set the correct day.
MO →TU →WE→ TH →
FR→SA→SU→MO TU
WE TH FR → SA SU→
MO TU WE TH FR SA
SU (cycle).
7. Digital Timer + Photocell Setting
1. Press “MODE” to select
“AUTO P
photocell setting”, then
press and hold “PROG”
button for two seconds to
set the off time.
2. Panel Layout
1. POWER - Power
indicator light indicates if
the yard stake is turned
on or off.
2. SENSOR - Sensor will
turn yard stake on at dusk
and off at dawn.
3. MODE - Manual override
scroll between timer
status options.
4. TIME - Press and hold for
2 seconds to set current
time.
5. PROG - Press and hold
for 2 seconds to begin
setting function. (Only
works under “AUTO ” or “AUTO ” mode).
6. <+> - To increase time and day setting.
7. SET/ - Setting confirms and clear setting (Press
and hold for 2 seconds).
1. ON - Always on.
The outputs remain
always on.
2. OFF - Always off.
The outputs remain
always off.
3. RDM - Security feature.
On at a random time and
will remain ON for 15
minutes.
Up to 5 on/off events
every day. The on/off
events are built-into this
product, turn ON at a
random time and the ON time is different each
day, creating a more “lived-in” look.
4. AUTO - ON/OFF
program at AUTO mode.
ON/OFF at your exact
programmed timer.
Remark: Please refer to
“6” for setting in details.
5. AUTO - Photocell
Turn on the power at
dusk and turn off the
power at dawn
automatically.
5. MODE Setting
Press “MODE” button to choose the desired mode.
ON → OFF → RDM → AUTO → AUTO →
AUTO as follows.
6. AUTO - P
Photocell
On at dusk, OFF at your
exact programmed time.
Remark: Please refer to
“7” for setting in details.
4. Press the “SET” button
to enter the OFF time
minutes setting. Press
the "+" or "-" buttons to
set time.
2. Press “+” or “-“ button to
set the desired OFF day
of the week program.
You can select each day
individually, Monday to
Friday, Saturday/Sunday,
or an entire week to have
your timer turn on at dusk
and off at the set time.
3. Press the “SET” button
to enter the OFF time
hour setting. Press the
"+" or "-" buttons to set
time. Be sure to cycle
through until AM or PM
appears correctly.
2. Press the "SET" button to
enter the hour setting.
Press "+" or "-" buttons to
set the desired hours for
your timer to turn on. Be
sure that AM or PM
appears correctly.
3. Press the "SET" button to
enter the minute setting.
Press the "+" or "-"
buttons to set the desired
minutes for your timer to
turn on.
4. Press “SET” button to enter the program OFF
setting, the “1 OFF” will appear on the display.
Repeat steps 1 to 3 to set your desired OFF time,
up to 8 on/off program settings.
5. While setting the programs, press and hold the
“SET” button 2 seconds to clear the set program
time.
6. Once finished, press “TIME” button or wait for 15
seconds to restore your programs to back the
standby display.
5. You can press “SET” button to enter additional
programs, up to 8 off program setting. While
setting the programs, press and hold the “SET”
button to clear the set program time. Press
“TIME” button or wait for 15 seconds to store the
program, and go back to the standby display.
8. <-> - To reduce time and day setting.
9. RESET - Reset all the functions.
10. ON/OFF Switch - Press the switch “I” to start
your desired settings.
1-1
B
C
1-4
6-1
6-3
6-2
7-1
6
5-6
5-1
5-4
5-2
5-3
7-2
7-4
7-3
MODE
TIME
PROG
+
-
SET/
MODE
TIME
PROG
+
-
SET/
3
MODE
TIME
PROG
+
-
SET/
4
2
8
5
1
6
3
9
7
2-1
10
MODE
TIME
PROG
+
-
SET/
2-2
MODE
TIME
PROG
+
-
SET/
1-2
A
B
MODE
TIME
PROG
+
-
SET/
5-5
AB14429
Printed in China
3.3833”
3.3833”
3.3833”
3.3833”
3.3833”
3.3833”
3.3833”
3.3833”
3.3833”
3.3833”
3.3833”
3.3833”
Item: 50024(SP-045)
Page size: 11”(W)x8.5”(H)
Dieline:
______
Layout area:
______
Version Submitted by KAB: R1-1
Submission date: 2014/05/19
11”
8.5”
Page 1
Page 2
Page 3
11”
8.5”
ITEM #0050024
MODEL #SP-045
PACKAGE CONTENTS
OUTDOOR DIGITAL
TIMER YARD STAKE
OPERATING INSTRUCTIONS
2. Button Layout
1. POWER - Power
indicator light indicate if
the yard stake is turned
on or off.
2. SENSOR - Sensor will
turn yard stake on at dusk
and off at dawn.
3. MANU - Manual Override scroll between timer
status options.
a. ON - Always ON
b. OFF - Always OFF
c. AUTO - Timer Will turn ON/OFF according to
the program settings.
d. RDM - Run all events (programs) in a Random
mode.
4. TIME - Press and hold for three seconds to set
current time.
5. PROG - Press and hold for three seconds to
begin setting function.
3. Reset
Press the “RESET” button to reset your timer. This
will clear all programmed settings.
6. Program Setting
Before setting, make sure timer is set to AUTO and
RDM mode.
Press and hold "PROG" button for three seconds to
begin program setting, using the "+" and "-" buttons
4. Set Current Time
1. Press and hold "TIME" button to enter the current
time. First, set the day of the week; press "+" or
"-" button to set the correct day.
2. Press the "TIME" button to enter the hour setting.
Press "+"or "-" buttons to set the current hour. Be
sure that AM or PM appears correctly.
3. Press the "TIME" button to enter the minute
setting, Press the "+" or "-" buttons to set the
current minute.
4. Press the "TIME" button to finish setting the
current time and return to normal display.
1. Installation
1. Connect the two pieces
of the yard stake
together by screwing
Lower Stake (C) into
Upper Stake (B)
Call customer service at 1-866-994-4148,
8 a.m. - 6 p.m., EST, Monday - Thursday,
8 a.m. - 5 p.m., EST, Friday.
A
B
C
PART DESCRIPTION QUANTITY
1
1
A
B
Outlet
Upper Stake
1
C
Lower Stake
2. Attach the assembled \
stake to the Body (A) by
screwing the top of
Upper Stake (B) into the
base of the Body.
Be sure to firmly tighten
the stake to the body
before installing into the
ground.
3. Insert the stake 6 inches into the ground.
5. MODE Setting
Press MODE button to choose between function.
Timer→Photocell→Timer + Photocell→Timer
(repeat)
4. Press the switch to I
position
Operating:
1. Plug the yard stake into a GFCI-protected
grounded outlet. (CAUTION: Combined amp load
on all the outlets at any one time must not exceed
1875 watts).
Display MODE
Timer
ON/OFF at your exact
programmed timer.
ON at dusk or ON immediately;
OFF after 1~12 hours.
ON at dusk, OFF at your exact
programmed timer.
Explanation
Timer
+
Photocell
Photocell
6. <+> - To increase time and day setting.
7. MODE - Press and hold the “MODE” button to
scroll between the different mode settings.
a. Automatic Timer Program
b. Photocell
c. Timer+Photocell
8. <-> - To reduce time and day setting.
9. RESET - Reset all the functions.
10. ON/OFF Switch - Press the switch ON to start
your desired settings.
A
B
2-2
1-1
B
C
4
2
8
10
5
1
6
3
9
7
2
2-4
XXXXXX
Page 4
