CAUTION:
PLEASE FOLLOW THIS
INSTRUCTION MANUAL CAREFULLY
TO PREVENT ANY INJURIES OR
COMPLICATIONS THAT MAY ARISE.
WARNING:
Before installing or maintaining
the luminary, make sure all powers are
TURNED OFF
.
Verify that supply voltage is correct by
comparing it with the label information on all
fixtures. Make all connections in accordance
with the NEC requirements, and make sure
all luminaries are properly secured to prevent
any wire complications.
USHIBAYRxxxWPL (300W-480W) Series LED Highbays Installation Guide
TRUNNION
MOUNT
Hook Mount
CHAIN WITH EYE-
HOOK (NOT
INCLUDED)
SAFETY CORD
J-BOX
(NOT
INCLUDED)
OPTION 2:
The luminaires also come
with a Trunnion Mount which can be
used to surface mount the fixture in
various positions covering an 180
°
spread. It has 3 openings which can
be used to fasten the fixture onto a
surface with bolts.
(bolts not included)
OPTION 1:
The luminaires come with a
Hook Mount which can be used to install
into a Eye Hook (Not Included). Screw in
the Hook Mount into the back Threaded
hole in the luminaire. Tighten the hook
properly and mount it to the Eye Hook.
DIMMABLE
LED
DRIVER
V(-)
[BLUE]
V(+)
[BROWN]
TO LOAD
[LED BOARD]
[WHITE]
[BLACK]
ACN [WHITE]
ACL [BLACK]
GROUND [GREEN]
NEUTRAL [WHITE]
GROUND [GREEN]
HOT [BLACK]
INPUT
OUTPUT
DIM
BLACK(-)
INSIDE J-BOX
PRE-CONNECTED
(DO NOT DISCONNECT)
3. All wiring connections must be
made inside a Junction Box.
Make sure to choose the correct
junction box for the desired
application. Some junction boxes
are made for outdoor applications
and others are made for indoor
applications.
4. All fixtures also come with a
Safety Cord used as an extra
precaution to prevent any
accidents.
The Safety Cord is pre-installed
in the fixture and should be able
to be connected to the chain
which is firmly installed to the
ceiling or surface.
SAFETY
CORD
GRAY(+)
