S/2 Solar Fairy Stakes
K324
v001: 15/10/21
Please read and retain these instructions for future reference
ALWAYS POSITION IN DIRECT SUNLIGHT
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the
packaging.
Connect the top part with the stake part by twisting them together.
Before using first time
Allow lamp to charge for at least 8 hours in full sunlight with
the ON/OFF switch in the ON position. The ON/OFF switch is
located under the solar panel. Once the batteries are fully
charged, set the ON/OFF switch to ON. If the lamp does not
turn on after dark refer to Maintenance section.
NOTE: In order to verify that the button is correctly in the “
ON ” position, cover the solar panel with your hand and light
should turn “ON” automatically.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of
hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed
in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the
light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from
coming on, or cause it to turn off automatically
To easily insert stakes into the ground, it is recommended to wet the ground first. To avoid damaging garden
stakes when inserting into the ground, select a spot in soft, rock-free soil. Insert the base of the stake first
Dimensions
(H) 91x (W) 27x (D) 4cm
Material:
Metal and Plastic
LEDs not replaceable
•
MAGICAL AND VIBRANT SOLAR FAIRY STAKES
WILL CAST A SPELL ON YOUR GARDEN
•
IN STRIKING BLUE AND PINK COLOURS
•
AT NIGHTTIME THE 12 BRIGHT LEDS ON EACH
FAIRY AUTOMATICALLY ILLUMINATE FOR A
DAZZLING DISPLAY THAT LIGHTS UP YOUR
GARDEN
•
SCATTER AMONGST FLOWERS, PATHS ETC FOR A
SPRINKLING OF FAIRY DUST
•
AAA 1.2V NI-MH 300MAH BATTERY (not
replaceable)
