RPST
-
2424
RemotePro
®
Remote Power System
▫
Wireless Base Stations
and Client Devices
▫
Surveillance Cameras
▫
Remote Sensors
▫
Remote Lighting
▫
Off Grid Electronics
Congratulations!
on your purchase of the RemotePro
®
off
-
grid
remote power system. Please take a moment to review this Qwik
Install Guide before assembly or battery installation.
DANGER! Avoid Powerlines!
You Can Be Killed!
When following the instructions in this guide take extreme care
to avoid contact with overhead power lines, lights and power circuits.
Contact with power lines, lights or power circuits may be fatal. We rec-
ommend to install no closer than 20 feet to any power lines.
Safety:
For your own protection, follow these safety rules.
▫
Perform as many functions as possible on the ground
▫
Do not attempt to install on a rainy, windy or snowy day or if
there is ice or snow accumulation at the install site or if the
site is wet.
▫
Make sure there are no people, pets, etc. below when you are
working on a roof or ladder.
Recommended Tools:
Phillips Screwdriver, 13mm and 10mm
Open End Wrench,
5/16”
nut driver, Flat Blade Screwdriver
Please help preserve the environment and return
used batteries to an authorized depot
