background image

Transition Networks 

 

PS-DC-DUAL-5624T Power Supply Install Guide 

33788 Rev. D 

                             

https://www.transition.com

  

Page 

1

 of 

18

 

 

PS-DC-DUAL-5624T 

345 Watt Isolated Power Supply with 56VDC and  

24 VDC Dual Output 

Install Guide 

Contents 

1. Introduction ...........................................................................................................................................................1 

Ordering Information .......................................................................................................................................................... 2 

Features............................................................................................................................................................................... 2 

Specifications ...................................................................................................................................................................... 3 

Power Cord Specifications ................................................................................................................................................... 4 

Connectors and LEDs ........................................................................................................................................................... 7 

Dimensions .......................................................................................................................................................................... 8 

Power Cords ........................................................................................................................................................................ 8 

Front Panel Descriptions ..................................................................................................................................................... 9 

2. Installation ........................................................................................................................................................... 10 

Cautions and Warnings ..................................................................................................................................................... 10 

Unpacking ......................................................................................................................................................................... 11 

Mounting ........................................................................................................................................................................... 12 

Grounding ......................................................................................................................................................................... 12 

Connecting POWER OUTPUT ............................................................................................................................................ 12 

Connecting AC INPUT ........................................................................................................................................................ 12 

PWR (Power) LED .............................................................................................................................................................. 13 

Fuse Replacement ............................................................................................................................................................. 13 

Installing TN 16210 Ferrite ................................................................................................................................................ 13 

Related Manuals ............................................................................................................................................................... 14 

For More Information ....................................................................................................................................................... 14 

Application Example .......................................................................................................................................................... 14 

3. Related Information ............................................................................................................................................. 15 

Troubleshooting ................................................................................................................................................................ 15 

Compliance Information ................................................................................................................................................... 15 

Electrical Safety Warnings ................................................................................................................................................. 16 

Warranty ........................................................................................................................................................................... 16 

Product Label and Box Label ............................................................................................................................................. 17 

Contact Us ......................................................................................................................................................................... 18 

Record of Revisions ........................................................................................................................................................... 18 

 

1. Introduction 

The Power Supply provides 345W at 56VDC and is targeted for PoE applications. The Power Supply is fully compliant with 

IEEE 802.3af, at, and bt PoE standards for isolation. It provides a secondary fully-isolated 24V at 1.25A (30W) output for 

other equipment. 

 

 

Summary of Contents for PS-DC-DUAL-5624T



















Reviews: