![background image](http://html.mh-extra.com/html/transition-networks/csdtf3011-115/csdtf3011-115_user-manual_1151739001.webp)
Installation . . . . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . . . . .6
Cable Specifications . . . . . . . . . . . . . .7
Technical Specifications . . . . . . . . . . .8
Troubleshooting . . . . . . . . . . . . . . . . .9
Compliance Information . . . . . . . . .12
* Typical maximum cable distance. Actual
distance is dependent upon the physical
characteristics of the network.
CSDTF3027-115
75 ohm BNC coax
100 m
(328 ft.)*
ST, 1300 nm multimode
5 km
(3.1 miles)*
Part Number
Port One - Copper
Port Two - Duplex Fiber-Optic
CSDTF3011-115
75 ohm BNC coax
100 m
(328 ft.)*
ST, 850 nm multimode
2 km
(1.2 miles)*
CSDTF3012-115
75 ohm BNC coax
100 m
(328 ft.)*
ST, 1310 nm single mode
8 km
(4.8 miles)*
CSDTF3013-115
75 ohm BNC coax
100 m
(328 ft.)*
SC, 850 nm multimode
2 km
(1.2 miles)*
CSDTF3014-115
75 ohm BNC coax
100 m
(328 ft.)*
SC, 1310 nm single mode
20 km
(12.4 miles)*
CSDTF3015-115
75 ohm BNC coax
100 m
(328 ft.)*
SC, 1310 nm single mode
40 km
(24.8 miles)*
CSDTF3016-115
75 ohm BNC coax
100 m
(328 ft.)*
SC, 1310 nm single mode
60 km
(37.3 miles)*
CSDTF3017-115
75 ohm BNC coax
100 m
(328 ft.)*
SC, 1550 nm single mode
80 km
(49.7 miles)*
CSDTF3018-115
75 ohm BNC coax
100 m
(328 ft.)*
MT-RJ, 1300 nm multimode
2 km
(1.2 miles)*
CSDTF3022-115
75 ohm BNC coax
100 m
(328 ft.)*
ST, 1310 nm single mode
15 km
(9.3 miles)*
CSDTF3025-115
75 ohm BNC coax
100 m
(328 ft.)*
MT-RJ, 1310 nm single mode
20 km
(12.4 miles)*
User’s Guide
CSDTF30xx-11x
Slide-in-Module Device
•
E1 with Remote Management
•
Coax (BNC) to Fiber
Transition Networks CSDTF30xx-11x series Device,
designed to be installed into the Transition Networks
PointSystem™
chassis, encodes and decodes E1 coax copper
signals over fiber optic cable to extend the distance and
transmission reliability of high-speed E1 data traffic. The
CSDTF30xx-11x is framing independent
(as ESF vs. D4)
and supports all common line codes
(e.g., AMI, B8ZS,
HDB3).
The CSDTF30xx-11x is designed to be installed in pairs. For example, install
one CSDTF3011-115 as the local Device and another CSDTF3011-115 as the remote
Device.