Page 1 of 2
Version: 2
1. Insert the corner bracket into the slot of one frame side as shown. Using the hex key provided, loosely tighten one screw so the
bracket does not slip out. Attach the next bracket pair to the opposite end of the same frame same.
2. Repeat step 1 for the opposite frame side
3. Insert the brackets of the one frame side into frame sides without brackets. Repeat for opposite frame side. Fully tighten all screws.
4. Mount the frame to the cabinet structure, using screws and anchors appropriate to your environment. Ensure frame is well secured
and supported on all 4 sides, as graphic will pull on frame.
5. Install the graphic per the instructions on the next page.
Charisma Cabinet Frame™ - XCAB Series
XCAB1824 shown
3.
5.
4.
1.
2.
1.
1.
3.
3.
3.
3.
2.
2.
5.
Mount to
cabinet using
screws, ensure
frame is well
secured
