background image

R

2800 LAURA LANE • MIDDLETON, WI 53562 • (800) 288-9383 • FAX (608) 836-9044 • www.tcsbasys.com

1

QD2010a

 

Embedded Site Communication 

Center

Product Manual           

Description                              

The QD2010a Series Embedded Site Communication 

Center is designed to act as an Internet gateway 

appliance working in conjunction with the centrally 

hosted Ubiquity web application. Users can network 

the QD2010a utilizing the onboard Ethernet port. 

Loop Control and energy metering of demand and 

consumption is standard to the unit as well.

Features                                 

•  Integrated Web Server with 512 MB of Flash 

memory and 512MB of DDR2 memory

•  Integrated 10/100 Ethernet controller with firewall 

capabilities 

•  Interface into Ubiquity 

•  Interface for configurations

•  Remotely upgradable firmware

•  User definable communication cycles

•  SSL (Secure Socket Layer) enabled web pages

•  Integrated controller addressing  

•  Supports up to 3 TCS Basys Controls devices 

Contents                                 

Description

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1

Features

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1

Material List

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1

Programming

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

Prior Connection to Network

  . . . . . . . . . . . . . . . . . . .

2

Initial Configuration

. . . . . . . . . . . . . . . . . . . . . . . . . . .

2

Mounting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

Connections

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

RS485 Network Wiring and Setup

. . . . . . . . . . . . . . . 3

Setup Page

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4

Commissioning Tools

. . . . . . . . . . . . . . . . . . . . . . . . .

6

Ubiquity Systems Software

  . . . . . . . . . . . . . . . . . . . . 7

Checkout and Troubleshooting. . . . . . . . . . . . . . . . . . 8

Material List                            

•  QD2010a Site Communication Center

•  Power cord

•  10 ft CAT 5 Crossover Cable (used for connecting 

directly from PC to QD2010a only)

•  10 ft CAT 5 Patch Cable

•  QD1010-USB USB to RS485 Converter

Summary of Contents for QD2010a









Reviews: