![background image](http://html1.mh-extra.com/html/talius/somfy-rts/somfy-rts_quick-start-manual_3375570001.webp)
If you did not request Talius to pre-set the limit settings on your unit prior to shipping, follow the steps below
to set UPPER and LOWER Limits for the first time. If you requested Talius to pre-set the limits but need to adjust
them, please refer to the instructions on the reverse.
Talius © 2020
Programming Limit
Settings for the First Time
Somfy® RTS Motors
CHECK THE DIRECTION OF OPERATION
Press and hold the
DOWN
button on the remote and confirm that the motor
moves in the down direction (the motor will operate in momentary fashion). To
change the direction, press and hold the
MY (stop)
button until the motor jogs.
Operate motor to your desired Upper Limit position.
SET THE LOWER LIMIT
Press and hold the
MY (stop)
and
DOWN
buttons on the remote until the motor
moves in the down direction, then release.
Stop the motor where the Lower Limit should be set. Adjust by pressing the
UP
or
DOWN
buttons on the remote.
SET THE UPPER LIMIT
Press and hold the
MY (stop)
and
UP
button on the remote to move the motor to
the desired Upper Limit
position, then release.
The motor will stop at the original upper point. Adjust if necessary.
CONFIRM THE LIMIT SETTINGS
Press and hold the
MY (stop)
button until the motor
jogs to confirm the setting.
SAVE THE LIMIT SETTINGS
Press and hold the
PROGRAM
button on the back of the remote until the motor
jogs. It will now operate in a maintained fashion.
Double check limits as a precaution.
INITIATE PROGRAMMING MODE
On the remote, press both the
UP
and
DOWN
buttons
at the same time until the motor jogs.
Note:
After every command the motor will jog to confirm.