SWF EMBROIDERY MACHINE
fixing screws
T-wrench or L-wrench(2,4MM)
Set the lifting slider
and replace the shaft
1.Lightly Tighten the Base Plate Fixing Screws
1) Check the position of screws inside of sequin
device.
[Refer to Picture 1-1]
How to Set the Lifting Guide Shaft
1
2
Lightly tighten the base plate
[Picture 1-2]
fixing screws.
[Refer to Picture 1-2]
2) Use T or L wrench (4mm) to lightly loosen the base plate
[Picture 1-1]
[F3] SEQUIN DEVICE
A. Content
SU-M-26
Order
Tools Required
B. Order
C.
Details
JIG /
Instruments
No.
CD CODE No:
─ Ver.2009 1st
────────────────────── SunStar Co., Ltd ─
