background image

                                                                                                                                           

www.sunfounder.com 

 

 

Preface 

About SunFounder

 

SunFounder  is  a  technology  company  focused  on  Raspberry  Pi  and  Arduino  open  source 
community  development.  Committed  to  the  promotion  of  open  source  culture,  we  strive  to 
bring the fun of electronics making to people all around the world and enable everyone to be a 
maker.  Our  products  include  learning  kits,  development  boards,  robots,  sensor  modules  and 
development tools. In addition to high quality products, SunFounder also offers video tutorials 
to help you build your own project. If you have interest in open source or making something 
cool, welcome to join us! Visit

 

www.sunfounder.com

 

for more! 

About This Kit 

In this book, we will show you how to build the bionic robot via description, illustrations of 
physical  components,  in  both  hardware  and  software  respects.  You  may  visit  our 
website 

www.sunfounder.com

  to  download  the  related  code  and  view  the  user  manual 

on 

LEARN -> Get Tutorials

 and watch related videos under 

VIDEO

Free Support 

If  you  have  any 

TECHNICAL  questions

,  add  a  topic  under

 

FORUM

 

section  on  our 

website and we’ll reply as soon as possible.   

For 

NON-TECH  questions

  like  order  and  shipment  issues,  please 

send  an  email  to 

[email protected]

. You’re also welcomed to share your projects on FORUM.

 

 

 

 

 

 

 

 

 

 

Summary of Contents for Bionic Robot Lizard






































Reviews: