1
Door
Door pocket
FD80-H HEAVY DUTY SLIDING DOOR SYSTEM Installation Manual
(Surface mount roller Type for Pocket Door, with Two-way Soft Close)
Part No.FD80DHCMP-PD
Door height
Max. 2500 mm
2501 – 2700 mm
Door width
784 – 1500 mm
850 – 1500 mm
Min. Door thickness
30 mm
Max. Door weight
80 kg/door
Vertical adjustmernt
±
4 mm
Thank you for using our product. Before installation, please read this manual thoroughly to ensure correct installation.
Please keep this manual at hand for future reference.
●
This is a parts set for heavy duty sliding door system
for
residential & commercial use.
●
Built in soft closer, enables two-way soft closing movement in
both direction.
●
Two sections of track for easy maintenance after installing.
・
The closing speed of the soft closing type door may change
depending on the ambient temperature, operating method or
installation quality.
・
Recommended ambient temperature range is 5 to 40
℃
.
※
1
When using a light weight door, you may feel the resistance
of the soft closer when opening the door.
FOR YOUR SAFETY AND CORRECT
INSTALLATION
ABOUT THE PRODUCT
SPECIFICATIONS
Warning :
Caution :
If not followed, it may result in injury or damage.
Prohibited
Warning
Caution
Required
Meaning of symbols
If not followed, it may result in death or serious injury.
Do not use this product for any other purpose, or with doors that are outside the specifications of this manual.
Do not disassemble or modify any parts other than those described in this document.
This product should be installed by a qualified person. If the system is not installed correctly, the door will not
operate smoothly, and may cause injury.
It is necessary to manufacture the frame with sufficient strength so that it endures the weight of the door and any impact
upon opening/closing the door. Only use designated screws and ensure that they are fastened firmly. A frame with poor
strength or loose screws might result in the door falling and causing injury
If cutting any parts, make sure to remove any burrs before installation. Also check the upper track for any left-over burrs or
scraps and remove these.
We recommend that the installation is carried out by two people, in order to ensure proper installation and avoid
unnecessary stress on the parts.
Make sure to follow the designated dimensions, specifications, and horizontal/vertical angles. Make sure that the frame and
door are not warped, since it may affect the movement of the door.
This product is a part for architectural fittings. After installation, make sure to test the finished product thoroughly to ensure
that it is functioning and safe. Please inform the end user how to use the product safely.
Make sure to check the screws for slack at regular intervals (one month from first usage, half a year, and then one time
every year is recommended).
When installing the “pocket door” specification, make an “easy-maintenance” structure.
For example, use a removable panel.
