background image

1

FOLDING POCKET DOOR SYSTEM ALT-F 
Installation Manual

Thank you for using our product. Before installation, please read this manual thoroughly to ensure correct 
installation. Please keep this manual at hand for future reference.

Pocket door hardware for folding

door systems.

The folding door can be stored inside 
shallow cabinets.

ABOUT THE PRODUCT

2 Rail System

3 Rail System

Max. door width

450 mm / door

Max. door height

1830 mm

1831 - 2400 mm

Door thickness

23 - 30 mm

Max. door weight

10 kg / door

SPECIFICATIONS

FOR YOUR SAFETY AND CORRECT INSTALLATION

Warning :

Caution :

If not followed, injury or damage may result.

Prohibited

Warning

Caution

Required

Meaning of symbols

 If not followed, death or serious injury may result.

Provide a cabinet that can withstand the weight and impact of opening and closing the door. Be sure to use the specified 
screws and tighten them securely. If the mounting strength is insufficient, the door may fall and cause injury.
Do not use this product for any other purpose, or with doors that are outside the specifications of this manual.
Do not disassemble or modify any parts other than those described in this document.

This product should be installed by a qualified person in accordance with this manual. If it is not installed correctly, the door 
may fall and cause injury.
Follow the specified dimensions, specifications, and alignment of the cabinet. Warping, tilting or twisting of the cabinet or 
door may cause failure.
If cutting any parts, make sure to remove any burrs before installation. Also check the upper track for any left-over burrs or 
scraps and remove these.
This product is a part for furniture. After installation, please check the function and safety of the final product. Please inform 
the end user how to use the product safely.
Make sure to check the screws for slack at regular intervals (one month from first usage, half a year, and then one time every 
year is recommended).

Summary of Contents for LAMP ALT-F













Reviews: