SWHD
Folding
Handle
2 Speed
On-Off
Switch
12V DC
Power
Plug
Before using the appliance
for the first time, you must
read and understand the
operation manual
completely.
Consider this manual as
part of the product and
store it in a safe and
accessible place.
To enable safe operation of this hair dryer make sure you follow basic safety principles
to reduce a risk of personal injury, electric shock and fire.
Always ensure the hair dryer is kept in a dry place to avoid damage, and never hold
with a wet hand.
Always check the hair dryers 12V plug, cables and unit for any damage before use.
Do not use if damaged. Do not open the hair dryer there are no serviceable parts.
After 10 minutes of continuous use, switch off and unplug the hair dryer to
allow the appliance, wire & 12V plug to cool for 10 minutes.
Operating Instructions:
1. Before use check the ampage on the rating label corresponds to the electrical
capability of the vehicle 12V power socket or portable power supply,
(usually found in the vehicle or portable power supply manual).
2. Towel dry hair to remove excess water. DO NOT use the hair dryer on hair that is
dripping wet.
3. Insert the 12V plug into the vehicle 12V socket, and select the required level, 1 or 2.
4. As a general guide, use the HIGH (2) heat and speed setting for rough drying for
thicker hair, and the LOW (1) setting for finer hair and more precise control.
The cool setting can be used at the end to set the style.
5. Do not concentrate the airflow on any one area for an extended period of time.
12V
Hair Dryer
Safety Instructions:
FOR IN VEHICLE/INDOOR USE ONLY. NEVER USE THIS PRODUCT WHILST DRIVING.
