background image

 

                                                                                                                                                                 

 

 

ci-321

 

 

 

 

 

 

   

Page 1 of 2      

 

 

 

 

REV 000     

a

 2002 STI-CO INDUSTRIES, INC., 11 Cobham Drive, Orchard Park, NY 14127-4187   

Technical Support: E-mail: [email protected] Phone: 1-716-662-2680 Fax: 1-800-685-1122 

Made in U.S.A.

 

 

Antenna Mounting Instructions

 

FILM-NB-GPS  

INSTALLATION USING FILM ANTENNA MOUNTED ON GLASS: 

1.  Use alcohol swipe to clean dirt and dust particles from glass surface.  

2.  Install with glass above 65° F. so film does not appear cloudy.  

3.  Mount on glass between 1/8 ” - 1/4" (4-6mm) thick.   

4.  Refer to Figure 1- Antenna Placement 

5.  When choosing placement, leave room to attach amplifier.   

Note:

 Film antenna must be kept at least 2” away from metal.  Orientation of antenna is not critical. 

6.  Remove adhesive backingfrom film using pull-tabs.  

Avoid getting fingerprints on adhesive.

 

7.  After adhering film to glass, press out any air bubbles. 

8.  Remove top film protecting the antenna contact points. 

9.  Peel backing tape from amplifier using pull-tabs. 

10.  Line up amplifier terminal points with the points on the film. (Figure 2) 

11.  Apply pressure for 20-30 seconds.  Adhesive cures in 5 -10 minutes. 

 

  

Figure 2 – GPS Film Antenna 

 

INSTALLATION

 

USING DURABLE RE-

USABLE PLASTIC CARD:

 

1.  Remove protective film from plastic card before 

attaching antenna. 

Figure 1 – Antenna Placement 

Reviews: