Manual
Naos Automatik
Before you can start, you need to wind up your timepiece.
To do so, wind the crown (in position 1) clockwise about
15 times. If you notice a slight whirring sound, the movement
starts working.
Now you are ready to set the time. To do so, pull the crown to
position 3 and turn until the hands are in the correct position.
To set the date, push the crown in by one position so that it is
in position 2. Turn the crown clockwise until the correct date
is displayed. Now you can push the crown back to the starting
position (position 1).
Note: Your date changes at noon? This is because the
movement does not „know” if it is noon or midnight. If so,
simply wind your timepiece forward by 12 hours.
How to setup your timepiece
01
02
03
