Introduction
The
industrial digital output expansion board for
provides a powerful and flexible
environment for the evaluation of the driving and diagnostic capabilities of the
single high-side smart power solid
state relay, in a digital output module connected to 2.5 A industrial loads.
The
interfaces with the microcontroller on the
via 5 kV optocouplers driven by GPIO pins
and Arduino R3 connectors.
The expansion board can be connected to either a
development board.
It is also possible to evaluate a system composed of up to four stacked
expansion boards.
As an example, a system with four
expansion boards allows you to evaluate a quad channel digital
output module.
Figure 1.
X-NUCLEO-OUT05A1 expansion board
RELATED LINKS
For further details on configuration resistors, refer to UM2864
Getting started with X-NUCLEO-OUT05A1 industrial digital output expansion
board for STM32 Nucleo
UM2865
User manual
UM2865
-
Rev 1
-
March 2022
For further information contact your local STMicroelectronics sales office.
www.st.com
