background image

  southpaw enterprises, inc.

® 

Instruction Sheet

 

Fun Ride Deluxe  1148 

Store these instructions in a safe place or 

with the enclosed maintenance checklist 

Take time to familiarize yourself with the use and maintenance of this equipment before using.  Please file 
this Instruction Sheet in an accessible location:  the Instruction Sheet must be read and familiar to anyone 
who is using Southpaw Enterprises Equipment.  

IMPORTANT: Please check equipment immediately for any damage that may have resulted during shipping.   
If any damage has occurred, please contact Southpaw Enterprises, Inc. immediately.  

 

MATERIALS LIST: 
 

1 - Trolley Handle (2 pieces)                                     4 - Hex head bolts with lock washers and nuts 
1 - Set of Hand Grips (2 pieces)                                1 - Large round head screw with lock washer and nut  
1 - Steel pipe                                                           1 - Small round head screw with lock washer and nut  
1 - Steel cable (74 ft. coil)                                         6 - Cable clamps with lock washers, nuts and thread caps 
1 - Steel cable sling with loop at each end                 3 - Cable thimbles  
1 - Turnbuckle                                                         1 - Instruction Sheet 
4 - Wheels                                                               1 - Maintenance Checklist 
 

TOOLS NEEDED FOR ASSEMBLY: 
 

Screwdriver (slot head)                 Socket wrench 
Pliers or vise-grips                         Plastic bonding glue 
 

I

NSTALLATION AND ASSEMBLY INSTRUCTIONS: 

 

1.  Be sure that the structure you will install your eye bolts in will hold 600 lbs. 
2.  Be sure that the area between the uprights is level and at a distance of not less than 6 ft. from any structure or 
     obstruction. 
3.  Do not install the Fun Ride Deluxe over concrete, asphalt, or any other hard surface.  A fall onto a hard  surface 

could result in serious injury to the equipment user.  

4.

Cable Height:

 For Fun Ride Deluxe to operate properly and safely it is necessary to follow the mounting 

instructions carefully and observe the height recommendations.  One end of the cable must be mounted at a lower 
level than the other end and depending on the height of the user and the distance between the uprights, these 
levels can be easily determined by consulting 

TABLE 1.    

 

Measure the height of the user.  If there is more than one user, and less than 6 inches difference between their heights, 

then for this purpose use the height of the tallest user.  If the heights differ by more than 6 inches, it is 
recommended that the height of the cable should be adjusted for each individual.  Add 30 inches to the height of 

 

Use Fun Ride  only after it is properly installed by an adult.  

Get off Fun Ride only after it has completely stopped and drop gently to the ground. 

Fun Ride is designed to be used by only one rider at a time, 8 yrs. old to adult, weighing up to 225 lbs.  

Do not walk close to, in front of, behind, or between a moving Fun Ride or any other moving object. 

Not to be used without adult supervision. 

Always begin ride from a stable platform. 

Always grip handles firmly with both hands before beginning the ride. 

Do not attach ropes or other objects to the Fun Ride. 

Dress appropriately with well fitting shoes and no ponchos, scarves or other loose fitting clothing which 

WARNING 

Summary of Contents for Fun Ride Deluxe 1148

Page 1: ...or obstruction 3 Do not install the Fun Ride Deluxe over concrete asphalt or any other hard surface A fall onto a hard surface could result in serious injury to the equipment user 4 Cable Height For Fun Ride Deluxe to operate properly and safely it is necessary to follow the mounting instructions carefully and observe the height recommendations One end of the cable must be mounted at a lower level...

Page 2: ...ure the cable with the other two cable clamps Push the thread caps over the exposed threads on the cable clamps Depending upon the length of your ride you may now have extra cable This excess should be removed Using a wire cutter or pliers to remove any excess wire protruding beyond 6 inches from the last cable clamp Wrap both protruding cable ends with electrical or duct tape to cover any sharp o...

Page 3: ...e appropriate choice of activity to match yet challenge their physical abilities Use appropriate spotting safety This sheet is for example only It is not meant to in any way replace local county state or Federal standards Be aware it is your responsibility to find all pertinent safety information that pertains to your facility Southpaw Enterprises Inc If you have any questions or comments please c...

Page 4: ...CHES 78 INCHES 108 INCHES 102 INCHES 96 INCHES 90 INCHES 54 INCHES 84 INCHES 114 INCHES 108 INCHES 102 INCHES 96 INCHES 60 INCHES 90 INCHES 120 INCHES 114 INCHES 108 INCHES 102 INCHES 66 INCHES 96 INCHES 126 INCHES 120 INCHES 114 INCHES 108 INCHES 72 INCHES 102 INCHES 132 INCHES 126 INCHES 120 INCHES 114 INCHES WARNING Do not add additional slope to the cable This will not improve the ride and may...

Reviews: