Job Item#
www.yatesgd.com www.yatesgraphicdesign.com
Form KELT Rev 1 (November/2010)
E
lEctric
S
tEam
t
ilting
K
EttlE
M
odel
C
apaCity
KELT-20
20 Gallon
76 Liter
KELT-30
30 Gallon
114 Liter
KELT-40
40 Gallon
152 Liter
KELT-60
60 Gallon
227 Liter
KELT-80
80 Gallon
303 Liter
KELT-100
100 Gallon
379 Liter
SPECIFICATIONS:
Shall be a Southbend Model________________________ ,
self-generating, electric tilting kettle. A double wall kettle interior
shall form a steam jacket around the lower 2/3 of the kettle. The
jacket enclosure shall contain distilled water which is factory
sealed. The bottom of the kettle shall be of hemispherical design
for superior heat circulation.
The console shall be drip proof, stainless steel clad and shall
be supported on all welded, 1-5/8” (41 mm) diameter stainless
steel pipe frame and legs fitted with 4 hole adjustable flanged
feet for securing to floor.
The kettle shall pivot on a trunnion connected to the tilt
mechanism and the out-bore bearing connected to the frame
and shall permit the kettle to tilt forward a full 90° for complete
emptying. The tilt mechanism shall be self locking for positive
stop action.
Construction shall be all welded #4 finish stainless steel, type
304. The interior on the 20, 30 and 40 gallon models shall be
standard stainless stel typ 316 for high acid content cooking. The
controls shall be integrally mounted and shall include a power
switch, thermostat, pilot light, low water light, vacuum/pressure
gauge, safety relief valve, and low water shut off.
The kettle shall be standard with removable elements. The kettle
shall operate in a temperature range of 165°F to 285°F
(74°C to
140°C)
at a maximum pressure of 50 psi
(345kPa).
OPERATION SHALL BE BY:
Electrically, self-generating closed steam system operating at 50 psi
equipped for operation on:
208 VAC, 1 Phase, 50/60 Hz. (20 and 30 gallon only)
208 VAC, 3 Phase, 50/60 Hz.
240 VAC, 1 Phase, 50/60 Hz. (20 and 30 gallon only)
240 VAC, 3 Phase, 50/60 Hz.
OPTIONAL ITEMS AT EXTRA COST:
Type 316 stainless steel liner (60, 80 and 100 gallon models)
2”
(50 mm)
draw-off valve (TVT-2)
3”
(76 mm)
draw-off valve (TVT-3)
2”
(50 mm)
dairy valve (DDO-2T)
3”
(76 mm)
dairy valve (DDO-3T)
24 kw on 40, 60, 80 gallon
33 kw on 60, 80, 100 gallon
220 VAC, 1 Phase, 50/60 Hz (20 and 30 gallon only)
220 VAC, 3 Phase, 50/60 Hz.
380 VAC, 3 Phase, 50/60 Hz.
415 VAC, 3 Phase, 50/60 Hz.
480 VAC, 3 Phase, 50/60 Hz.
600 VAC, 3 Phase, 50/60 Hz.
380/220 VAC, 3 Phase, 50/60 Hz. 4 wire
415/240 VAC, 3 Phase, 50/60 Hz. 4 wire
Spring assist hinged cover for 20, 30 or 40 gallon models (CH-)
Etched gallon markings (GM-)
Etched litre markings(LM-)
Correctional package
ACCESSORIES:
One piece lift off cover (C-)
Triple basket assembly (TBA-)
Perforated strainer for draw-off valve (TPS-)
Solid stainless steel disc for draw-off valve (TSS-)
Graduated measuring strip (CMS-)
Strainer hook (SH)
Single pantry faucet with swing spout (SF-18)
Double pantry faucet with swing spout (DF-18)
Pan support (PC-1)
Pour lip strainer (TKS-)
Draw-off valve hose kit (DVHK-2)
Calibrated thermostat dial “F”
Calibrated thermostat dial “C”
Kettle shown with optional Spring Assist
Cover and Draw-off valve
