SERVICE MANUAL
SPECIFICATIONS
KE-50MR1
FLAT PANEL COLOR TELEVISION
AEP Model
Media Receiver Unit (MBT-MR1)
Power Requirement: 220-240V AC; 50/60 Hz
Power Consumption: 27 W
Standby Power Consumption: 0.6 W
Dimensions (w x h x d):
Approx. 430 x 105 x 360 mm
Weight:
Approx. 6 kg
Display Unit (PDM-5000)
Power Requirement: 100-240V AC; 50/60 Hz
Screen Size: 50inches
Approx. 127 cm measured
diagonally
Display Resolution:
1365 dots (horizontal) x 768 lines
(vertical)
Power Consumption: 540W
Standby Power Consumption: 0.6W
Dimensions (w x h x d):
Approx. 1,573 x 856 x 108 mm
Weight:
Approx. 53 kg
Panel System:
Plasma Display Panel
TV system:
Depending on your country selection:
B/G/H, D/K, L, I
Colour system:
PAL, SECAM
NTSC 3.58, 4.43 (only Video In)
Aerial:
75 ohm external terminal for VHF/UHF
Channel Coverage:
VHF: E2-E12
UHF: E21-E69
CATV: S1-S20
HYPER: S21-S41
D/K: R1-R12,
R21-R69
L:
F2-F10, B-Q, F21-F69
I: UHF
B21-B69
Rear Terminals:
1/
21-pin Scart connector (CENELEC
standard) including audio/video input,
RGB input, TV audio/video output.
2/
21-pin Scart connector (CENELEC
standard) including audio/video input,
RGB input, TV audio/video output.
3/
(SMARTLINK; selectable)
21-pin Scart connector (CENELEC
standard) including audio/video input, S
video input, selectable audio/video
output and Smartlink interface.
4/
(SMARTLINK; selectable)
21-pin Scart connector (CENELEC
standard) including audio/video
input, RGB input, selectable audio/
video output, and Smartlink interface.
5
Y:
1 Vp-p, 75 ohms, 0.3V negative sync
P
B
: 0.7 Vp-p, 75 ohms
P
R
: 0.7 Vp-p, 75 ohms
5
audio input (phono jacks)
500 m Vrms (100% modulation),
Impedance: 47 kilo ohms
SUB WOOFER: phono jack
: audio outputs (Left/Right) - phono jacks
CENTRE SPEAKER IN:
Max. 180W (6-ohms)
CTRL S: minijack
AV MOUSE: minijack
S
5
5
5
5
5
5
5
5
