Sony SA-WM200, Service Manual

Page: 1 / 14

SA-WM200
SERVICE MANUAL
SPECIFICATIONS
US Model
Canadian Model
AEP Model
UK Model
E Model
9-877-108-01
2003B0200-1
© 2003.02
Sony Corporation
Home Audio Company
Published by Sony Engineering Corporation
ACTIVE SUBWOOFER
Ver 1.0 2003.02
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6 ohm loads, from 28 – 200 Hz; rated 80 watts, minimum RMS
power, with no more than 0.8 % total harmonic distortion from 250
milliwatts to rated output.
System
Type
Active Subwoofer (magnetically shielded design)
Speaker unit
Woofer: 20 cm dia. (8 in.), cone type
Amplifier section
Continuous RMS output : (0.8%) 80W
Reproduction frequency range
28 Hz – 200 Hz
High frequency cut-off frequency
50 Hz – 200 Hz
Phase selector
NORMAL, REVERSE
Inputs
Input jacks
INPUT: input pin jack
SPEAKER IN: input terminals
Output jacks
SPEAKER OUT: output terminals
General
Power requirements
USA and Canada models: 120 V AC, 60 Hz
Other models: 220-230V AC, 50/60 Hz
Power consumption
100 W
Dimensions
Approx. 270 x 325 x 398 mm
(10
3
/
4
x 12
7
/
8
x 15
11
/
16
in.) (w/h/d)
Mass
10 kg (22 lb 1oz)
Supplied accessories
Foot pads (4)
Audio connecting cord (1 phono – 1 phono),
2 m (6 ft 6
1 /
2
in.) (1)
Speaker cords, 2.5 m (8 ft 2
1
/
2
in.) (2)
Design and specifications are subject to change without notice.