background image

E

nglish

8188

¨ ¨ ¨

1

English

TABLE OF CONTENTS

SAFETY INSTRUCTIONS .................................................................. 2
INTRODUCTION ............................................................................. 4

Package Contents ..................................................................... 4
Installing or Removing  the Tilt/Swivel Base ............................ 5
Specifications ........................................................................... 6
Recommended Use of the Monitor .......................................... 7

CONTROLS AND ADJUSTMENTS ................................................... 8

Front User Controls. ................................................................ 8
"General" ................................................................................. 9
"Picture" .................................................................................. 9
"Geometry" .............................................................................. 9
"Color" ..................................................................................... 9
"Advance" .............................................................................. 10

Moire ............................................................................. 10

Convergence .................................................................. 10

Purity.............................................................................. 10

Degauss .......................................................................... 10

"Property" .............................................................................. 10

Status .............................................................................. 11

Recall ............................................................................. 11

Language ........................................................................ 11

"Signal" .................................................................................. 11
Contrast ................................................................................. 11
Energy Declaration ................................................................ 12

TECHNICAL INFORMATION......................................................... 13

Compatibility ......................................................................... 13

Pin Assignment ............................................................... 13

Pin Assignments of the BNC and USB Connectors ......... 13

Preset Timing Chart ........................................................ 14

TROUBLESHOOTING .................................................................... 15
DIMENSION .................................................................................. 16

Summary of Contents for pr960f

















Reviews: