Quick Start Guide
©2004 by Sony Corporation
Ecological Paper - Totally Chlorine Free
4-103-039-
11
(1)
Printed in Spain
Thank you for purchasing this Sony product.
After following this step by step guide you will be
able to:
Insert Batteries into the Remote Control.
Connect the AC Cable, Aerial and VCR to your
TV.
Stabilize the TV set.
Tune your TV.
Change the broadcast channels into a
different order.
View TV Programmes.
Use the basic functions of the Remote Control.
Make sure you insert the supplied batteries using the correct polarities.
Always remember to dispose of used batteries in an environmentally friendly way.
• Use the supplied mains lead (Type BF, see step 1).
• Use one of the supplied coaxial cables for aerial connection, and the other one for digital connection.
• The Scart lead is optional, however if you use a Scart lead to connect your VCR it can improve
picture and sound quality when using it.
• For more details of VCR connection, please refer to the section “Connecting Optional
Equipment” on page 50 of the instruction manual.
If you do not have a Scart lead, after automatically tuning the TV, tune in the VCR test signal to
the TV programme number “0” by using the “Manual Programme Preset” option. (for details of
how to manually programme these presets, see page 32, step A of the instruction manual).
Refer to your VCR instruction manual to find out how to find the output channel of your VCR.
1 Remote control (RM-Y1011):
2 Batteries (AA size):
2 Coaxial Cables:
2 Anchor attachments:
1 Cleaning Cloth:
1 AV Mouse:
1 Mains Lead (Type BF):
1 Clamp Belt:
1 “Notes on the Plasma TV” book.
Do not remove ferrite cores.
OUT
IN
VCR
Connecting an aerial
Connecting a VCR with an aerial
or
Do not connect to
the mains before all
connections are
complete.
Do not connect to
the mains before all
connections are
complete.
After setting up, secure the TV set to a wall, pillar, etc, using the supplied anchor
attachments, for a safety purposes.
1
Remove the two screws attached to the upper rear side of te TV set.
2
Replace the two screws with the two supplied anchor attachments.
3
Secure a wall anchor bracket (not supplied) to a solid wall or a pillar.
4
Pass a strong cord or chain trough both holes of the anchor attachments and then secure to a wall
or pillar, etc.
Connecting the AC
Cable, Aerial and VCR
Checking the
Accessories Supplied
KDE-P37XS1
KDE-P42XS1
4
Stabilizing the TV set
1
GB
3
Inserting Batteries into
the Remote Control
2
4-092-684-
01
(1)
Notes on the Plasma TV
©2002 Sony Corporation
English..............2
English..............2
English..............2
English..............2
English..............2
English..............2
English..............2
English..............2
English..............2
English..............2
English..............2
English..............2
English..............2
English..............2
English..............2
English..............2
English..............2
English..............2
English..............2
English..............2
English..............2
01GBQSKE-P37XS1.fm Page 1 Monday, March 29, 2004 3:23 PM
