Sony HCD-CX4iP Service Manual Download

Page: 1 / 56

SERVICE MANUAL

Sony Corporation

Published by Sony Techno Create Corporation

HCD-CX4iP/CX5iP

SPECIFICATIONS

COMPACT DISC RECEIVER

9-893-182-01

2011D05-1

2011.04

US Model

Canadian Model

HCD-CX4iP

AEP Model

E Model

Australian Model

Chinese Model

HCD-CX5iP

Ver. 1.0 2011.04

Model Name Using Similar Mechanism

NEW

CD Mechanism Type

CDM80BTK-F4BD94D-V

Base Unit Name

BU-F4BD94D-V

Optical Pick-up Block Name

KSM-215CFP

• HCD-CX4iP is the Amplifi er, CD player, Tuner

and iPod/iPhone section in CMT-CX4iP.

• HCD-CX5iP is the Amplifi er, CD player, Tuner,

iPod/iPhone and USB section in CMT-CX5iP/
WHG-CX5iP.

Photo: HCD-CX5iP

Amplifier section

European, Russian, and Israel models:

DIN power output (rated): 15 watts + 15 watts (8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference): 20 watts + 20 watts (8 ohms at
1 kHz, 10% THD)
Music power output (reference): 20 watts + 20 watts (8 ohms at 1 kHz, 10%
THD)

Other models:

DIN power output (rated): 15 watts + 15 watts (8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference): 20 watts + 20 watts (8 ohms at
1 kHz, 10% THD)

Input

AUDIO IN (stereo mini jack): Sensitivity 700 mV, impedance 47 kilohms

Outputs

SPEAKERS: Accepts impedance of 8 ohms

CD player section

System: Compact disc and digital audio system
Laser Diode Properties

Emission Duration: Continuous
Laser Output*: Less than 44.6μW
* This output is the value measurement at a distance of 200mm from the

objective lens surface on the Optical Pick-up Block with 7mm aperture.

Frequency response: 20 Hz 20 kHz
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 90 dB

Tuner section

FM stereo, FM superheterodyne tuner
Tuning range:

iPod/iPhone section

Compatible iPod/iPhone models:

iPod touch 4th generation
iPod touch 3rd generation
iPod touch 2nd generation
iPod touch 1st generation
iPod nano 6th generation
iPod nano 5th generation (video camera)
iPod nano 4th generation (video)
iPod nano 3rd generation (video)
iPod nano 2nd generation (aluminum)
iPod classic

iPhone 4
iPhone 3GS
iPhone 3G
iPhone

“Made for iPod,” and “Made for iPhone” mean that an electronic accessory has
been designed to connect specifically to iPod or iPhone, respectively, and has
been certified by the developer to meet Apple performance standards. Apple
is not responsible for the operation of this device or its compliance with safety
and regulatory standards. Please note that the use of this accessory with iPod
or iPhone may affect wireless performance.

USB section (CX5iP only)

Supported bit rate:

MP3 (MPEG 1 Audio Layer-3): 32 kbps   320 kbps, VBR
WMA: 48 kbps   192 kbps, VBR
AAC: 48 kbps   320 kbps

Sampling frequencies:

MP3 (MPEG 1 Audio Layer-3): 32/44.1/48 kHz
WMA: 44.1 kHz
AAC: 44.1 kHz

(USB) port: Type A, maximum current 500 mA

General (CX5iP)

Power requirements:

AC adapter

Input: 100 V 240 V AC, 50/60 Hz
Output: DC 19.5 V 3.9A

Power consumption: 28 watts
Dimensions (W/H/D) (excl. speakers):

Approx. 250 mm × 245 mm × 130 mm

Mass (excl. speakers): Approx. 2.2 kg
Quantity of the main unit: 1 piece

Design and specifications are subject to change without notice.

Standby power consumption: 0.5 W

US and Canadian models:

DIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
(The United States model only)
With 8 ohm loads, both channels driven, from 120 - 15,000 Hz; rated 20 watts
per channel minimum RMS power, with no more than 10% total harmonic
distortion from 250 milliwatts to rated output.

General (CX4iP)

Power requirements:

AC adapter

Input: 100 V 240 V AC, 50/60 Hz
Output: DC 19.5 V 3.9A

Power consumption: 24 watts
Dimensions (W/H/D) (excl. speakers):

Appro

Mass (excl. speakers): Approx. 2.2 kg (4 lb 14 oz)
Quantity of the main unit: 1 piece

Power output (rated): 15 watts + 15 watts (8 ohms at 1 kHz, 1

120 V AC area in E, Mexican and Argentina models:

% THD)

RMS power output (reference): 25 watts + 25 watts (8 ohms at 1 kHz)

US, Canadian and Brazilian models: