INSTALLATION INSTRUCTIONS
Sony Electronics Inc.
8832-000278
1 Sony Drive, Park Ridge, NJ 07656
10/08
P: 201-930-1000 www.sony.com/displaysystems
CH-SMAC400
MID-SIZE FLAT SCREEN ROTATION ACCESSORY
Prior to assembly, unpack carton completely and verify contents.
Figure 1
(1) Rotation Assembly
(4) Mounting Buttons – Tapped 10-24
(4) 10-24 x .5” Flat Head Cap Screws
(1) Locking Strap
(2) ¼-20 x .5” Button Head Cap Screws
(2) ¼-20 x .5” Security Button Head Cap Screws
(2) ¼-20 Square Nuts
(1) 5/32” Security Hex Key
(1) 1/8” Hex Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
CAUTION!
FLAT SCREEN DISPLAYS ARE EXTREMELY FRAGILE.
NOTE:
The CH-SMAC400 adds 0.94”of depth and 6 lbs (2.72 kg) to overall installation. It is the installer’s responsibility to ensure
that combined weight of screen and CH-SMAC400 does not exceed the maximum support weight of the mount.
1.
Remove screen from mount or, if not installed, install interface bracket to back of screen per instruction supplied with the
interface.
2.
Attach mounting buttons to Rotation Assembly, using the four 10-24 x 1/2” flat head cap screws. Make sure the buttons are
securely fastened. .
Figure 2
Figure 3
ATTACH
MOUNTING
BUTTONS
HERE
