background image

• 

Weitere Sprachversionen finden  
Sie unter www.solarwatt.net.

• 

Please find other languages at  
www.solarwatt.net.

Information on the solar module  P.10
Transport and storage 

P.10

Installation P.11
Electrical connection

and grounding 

P.14

Maintenance and servicing 

P.16

Disposal P.16
Information for complaints 

P.16

 cOntents

You can check the current status of 
the installation instructions at www.
solarwatt.net.

De

u

ts

ch 

s. 0

1 – 0

8

en

gl

is

h

 P.

 0

9 – 1

6

solarwatt installation instruCtions | en

sOlARWAtt

instAllAtiOn instRuctiOns

 

f

OR fRAMeD glAss-fOil sOlAR MODules

 

eu-stAnDARDs

EUROCODE 1 (EN 1991-1) 

Actions on structures

EN 13501  

Fire behavior of building materials and building 
component

EN 60728-11 

Setting up and operating (grounding) aerial systems

EN 62305 

Lightning protection

EN 62446 

Grid-coupled photovoltaic systems

I

EC 60364 

Erection of low-voltage systems

The following directives and standards must be complied with when planning, setting up, and maintaining grid-
connected PV systems:

VDe-DiRectiVes

VDE 0100 

Erection of low-voltage systems

VDE 0105-100 

Operation of electrical systems

eXclusiOn Of liABilitY

The warranty terms available at                                      
www.solarwatt.net apply.

VDe test MARK

 

SOLARWATT BLUE 60P 
 

Summary of Contents for Vision 60P style









Reviews: