background image

A Division of Snow Joe

®

, LLC

Model CJ601E

Form No. SJ-CJ601E-880E-MR4

R

OPERATOR’S MANUAL

ELECTRIC WOOD C SHREDDER

14-AMP | 16:1 REDUCTION RATIO

© 2017 by Snow Joe

®

, LLC

All rights reserved. Original instructions.

SAVE THESE INSTRUCTIONS

1

IMPORTANT!

Safety Instructions
All Operators Must Read These 

Instructions Before Use

Always follow these safety guidelines. Failure to do so may 

result in serious bodily injury or death.

General Safety WARNINGS! 

You and any other operator of this wood c shredder 

must read, understand, and follow these instructions in 

their entirety. Failure to follow these instructions may result 

in ELECTRIC SHOCK, FIRE, and/or serious PERSONAL 

INJURY. 

Notice the personal safety alert symbol 

m

 used in this 

manual to draw your attention to a WARNING given along 

with the particular operating instruction. This means that 

the operation requires special ATTENTION, CAUTION, and 

AWARENESS.

m

WARNING! 

Wear appropriate personal hearing 

protection during use. Under some conditions and duration of 

use, noise from this product may contribute to hearing loss.

m

WARNING! 

The rotating blades can cut you. Keep 

hands and feet away from the hopper and the discharge chute.  
Before using the wood c shredder, familiarize yourself 

with the controls, especially how to stop the unit in an 

emergency. The only individuals who should use the wood 

c shredder are those who thoroughly understand 

these instructions and know how to properly operate the unit. 

Children should never be allowed access to the wood chipper 

+ shredder.
Retain this manual for future reference and reread it at the start 

of each chipping season.

General Safety

1.  Avoid dangerous environments – Do not use the wood 

c shredder in rain or in damp or wet locations. Do 

not operate the unit in gaseous or explosive atmospheres 

or use the unit near flammable or combustible liquids. 

Motors in these tools normally spark, and the sparks 

might ignite fumes.

2.  Dress properly – Do not wear loose clothing or jewelry as 

such articles can become caught in moving parts. Wear 

a protective covering to contain long hair. Wearing rubber 

gloves and substantial non-slip footwear is recommended 

when working outdoors.

3.  Use safety glasses – Also use dust mask, safety 

footwear, snug-fitting clothing, protective gloves, hearing, 

 

and head protection.

4.  Extension cords – To prevent electric shock, use only 

with an extension cord suitable for outdoor use.

5.  Disconnect the tool – Disconnect the wood c 

shredder from the power supply when it is not in use, 

before servicing it, when changing accessories, and when 

performing any other maintenance task.

6.  Do not abuse the cord – Never carry the wood chipper 

+ shredder by the cord or yank the cord to disconnect it 

from the receptacle. Keep the cord away from heat, oil, 

and sharp edges.

7.  Stay alert – Watch what you are doing. Use common 

sense. Do not operate the wood c shredder when 

you are tired or under the influence of drugs, alcohol

, or 

other medication.

8.  Store idle tool indoors – When not in use, the wood 

c shredder should be stored indoors in a dry and 

high or locked-up place out of the reach of children.

9.  Maintain the wood c shredder with care – 

Keep the cutting edges sharp and clean for optimal 

performance and to reduce the risk of injury. Inspect the 

extension cord periodically and immediately replace it 

if damaged. Keep the handles dry, clean, and free from 

oil and grease. Follow the additional recommendations 

described in the Care + Maintenance section of this 

manual.

10. Check for damaged parts – Before further use of the 

appliance, a part that is damaged should be carefully 

checked to determine that it will operate properly and 

perform its intended function. Check for alignment of 

moving parts, binding of moving parts, breakage of parts, 

mounting, and any other condition that may affect its 

Summary of Contents for SUNJOE CJ601E

















Reviews: